Arduino

SKU: DF-SEN0290 | Brand: DFRobot

Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoor...

SKU: DF-SEN0250 | Brand: DFRobot

The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 ...

SKU: LB-LR0214-20 | Brand: Little Bird

The GP2Y0A41SK0F is a short range Sharp analog distance sensor. The detection range is 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolution measurements, and the lower minimum detection distance ...

SKU: AF-3795 | Brand: Adafruit

The Code.org CS Discoveries course is a yearlong curriculum for teaching computer science, and there's even a physical computing unit! For large classrooms and workshops, we recommend our Code.org Classroom pack. B...

SKU: DF-SEN0245 | Brand: DFRobot

The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional ...

SKU: PL-1707 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: AF-1057 | Brand: Adafruit

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...

SKU: AF-1411 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with...

SKU: LB-LS0239 | Brand: Little Bird

This e-textiles ambient light sensor uses the TEMT6000 phototransistor to detect light levels. Designed for wearable electronics, it features a compact 20 mm round PCB that's only 0.8 mm thick — thin enough to sew int...

SKU: LB-LS0233 | Brand: Little Bird

This is a breakout board for the WS2812B RGB LED. The WS2812B (or “NeoPixel”) is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out.Several of these breakouts c...

SKU: AF-3675 | Brand: Adafruit

The Adafruit Itsy Bitsy 32u4 3V packs the power of an Arduino Leonardo into a tiny 1.4" × 0.7" board. Built on the ATmega32u4 with native USB, it's perfect for compact projects that need a full set of GPIO pins withou...

SKU: SF-BOK-14270 | Brand: SparkFun

The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the materials contained in the kit. Examples and circuits are provided and exp...

SKU: PJ-PROP_SHIELD | Brand: Little Bird

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors - Allows motion interactive light & sound. Audio Amplifier - Clear quality au...

SKU: AF-2429 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2488 | Brand: Adafruit

The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with ...

SKU: DF-DFR0504 | Brand: DFRobot

The Analog Signal Isolator can isolate analog signal and provide isolated power to sensors. It can effectively prevent sensor signal interference and apply to multi-parameter water quality monitoring sensors. Because...

SKU: SF-COM-09288 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from...

SKU: SF-PRT-09279 | Brand: SparkFun

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-SEN-09196 | Brand: SparkFun

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...