Arduino

SKU: SF-PRT-10366 | Brand: SparkFun

A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. ...

SKU: SF-DEV-12761 | Brand: SparkFun

The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: SF-SEN-12728 | Brand: SparkFun

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: DF-DFR0382 | Brand: DFRobot

An Arduino-compatible shield featuring a 4-digit 7-segment digital tube display (common cathode, 0.56") with 5 input buttons. Uses I2C to drive the display, providing an easy interface for menus, controls, and numeric...

SKU: AF-1906 | Brand: Adafruit

The Pixy2 (CMUcam5) is a smart vision sensor that can be taught to detect objects, track lines, and identify intersections — all at 60 frames per second. It offloads image processing from your microcontroller, sending...

SKU: AF-1912 | Brand: Adafruit

A four-digit 0.54-inch blue alphanumeric LED display with an I2C backpack. Each digit has 14 segments, allowing it to display letters, numbers, and basic symbols. The bright blue LEDs on a black surface are readable f...

SKU: AF-1824 | Brand: Adafruit

This phone-style 3×4 matrix keypad features 12 buttons (0–9, *, #) with telephone-layout lettering printed on the keys. It uses a matrix scanning arrangement requiring only 7 microcontroller pins (3 columns + 4 rows) ...

SKU: SF-SEN-12617 | Brand: SparkFun

Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a ...

SKU: AF-3444 | Brand: Adafruit

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire...

SKU: DF-DFR0356 | Brand: DFRobot

INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity inter...

SKU: AF-716 | Brand: Adafruit

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and k...

SKU: DF-DFR0375 | Brand: DFRobot

INTRODUCTION The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to pre...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...

SKU: SF-COM-10079 | Brand: SparkFun

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-COM-10049 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag. Includes: 10...

SKU: SF-SEN-12589 | Brand: SparkFun

The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...

SKU: SF-COM-12584 | Brand: SparkFun

Are you looking to add a lot of color to your project? These massive 32x32 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read th...

SKU: AF-196 | Brand: Adafruit

The Proto-ScrewShield is a dual-purpose Arduino prototyping shield that combines a large through-hole prototyping area with screw terminal breakouts for every Arduino pin. Instead of soldering wires directly, you get ...