Arduino

SKU: EC-ACS52001S | Brand: Elecrow

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB inter...

SKU: EC-MCA01328A | Brand: Elecrow

The Crowduino is Arduino compatible board. Based on Arduino Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs.This Crowduino is a microcontroller board based on the ATmega328 (datasheet)....

SKU: EC-CDD13497DD | Brand: Elecrow

devDuino Sensor Node v4 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect other sensors or actuators to this platform,...

SKU: EC-AS54887CAN | Brand: Elecrow

The ELE CAN-Bus Shield V1.5 adds CAN-Bus communication capability to your Arduino. Built around the Microchip MCP2515 CAN controller and MCP2551 CAN transceiver, it supports CAN V2.0B at speeds up to 1 Mb/s with both ...

SKU: EC-AS402812NP | Brand: Elecrow

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onb...

SKU: EC-ACS17101S | Brand: Elecrow

This WiFi Shield connects your Arduino or Crowduino to the internet wirelessly. Just connect it to your wireless network with a few simple instructions, you can start to control your applications through the internet ...

SKU: EC-CCH01065C | Brand: Elecrow

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on t...

SKU: EC-ACM82664A | Brand: Elecrow

The Crowduino UNO ESP8266 combines an Arduino UNO-compatible microcontroller with an onboard ESP8266 WiFi module in a single, compact board. Instead of wiring a separate WiFi shield or module, you get integrated wirel...

SKU: EC-CCH01085C | Brand: Elecrow

A 8-pin female header, with extra long legs -- great for stacking Arduino Shields.And if you want 10- pin one, you can change the custom option,Specification Pin Pitch: 2.54mm Contact Length: 12mm Total length: 23.5mm...

SKU: EC-ACS53201S | Brand: Elecrow

NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon...

SKU: EC-SER04013B | Brand: Elecrow

This expansion board is the core controller for a dual-wheel self-balancing robot, designed to plug directly onto an Arduino UNO. It consolidates motor driving, gyroscope, ultrasound, and wireless connectivity interfa...

SKU: DF-DFR0664 | Brand: DFRobot

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible ...

SKU: EC-ACM36620M | Brand: Elecrow

A simple, yet powerful, 32-bit extension of the Arduino UNO platform. And we design this Crowduino- M0-SD board for you. This board also powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. The po...

SKU: EC-SEA0003T | Brand: Elecrow

The Crowtail-Deluxe Kit for Arduino is a kit for advanced learners with a basic programming foundation. It is designed to help learners diverge their ideas, learn how more complex electronic components work and progra...

SKU: EC-ACA2560MEG | Brand: Elecrow

Elecrow Crowduino Mega2560 board, almost the same usage and performance with the Arduino Mega2560 but with some difference on the power circuit to ensure the power. Based on the ATmega2560 (datasheet). The Elecrow Meg...

SKU: AF-4542 | Brand: Adafruit

A 10 kg strain gauge load cell for measuring force, weight, and tension. The strain gauge is epoxy-bonded to a robust aluminium bar that protects the delicate foil element and constrains deflection to a safe range. As...

SKU: EC-ARS04053S | Brand: Elecrow

The SIM5360E series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer.supports 3G network and combines GPS technology for...

SKU: SF-GPS-16329 | Brand: SparkFun

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...

SKU: SF-DEV-16790 | Brand: SparkFun

The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...

SKU: SF-PRT-16662 | Brand: SparkFun

A 2-pack of premium 6" male-to-male jumper wires in red and black — handy for power and ground connections where colour coding matters. Stranded core for flexibility with solid male pins on both ends for a reliable fi...