Arduino Wireless and IoT

SKU: EC-MCS01107S | Brand: Elecrow

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7)...

SKU: EC-ACS17101S | Brand: Elecrow

This WiFi Shield connects your Arduino or Crowduino to the internet wirelessly. Just connect it to your wireless network with a few simple instructions, you can start to control your applications through the internet ...

SKU: DF-TEL0026 | Brand: DFRobot

A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable bau...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: SF-WRL-13711 | Brand: SparkFun

This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-e...

SKU: SF-BOB-13311 | Brand: SparkFun

The Teensy 3.1 XBee Adapter connects your Teensy development board with the popular XBee wireless module, giving you a compact solution for projects requiring a reliable, no-frills wireless serial link with decent ran...

SKU: DF-DFR0409 | Brand: DFRobot

INTRODUCTION  The Arduino Proto shield allows an Arduino board to communicate wireless using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The ...

SKU: DF-TEL0177 | Brand: DFRobot

The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8...

SKU: DF-DFR1115-868 | Brand: DFRobot

This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency b...

SKU: DF-DFR1115-915 | Brand: DFRobot

This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa...

SKU: SF-DEV-23321 | Brand: SparkFun

Bring ESP32-S3 wireless projects into the Arduino ecosystem with this compact Nano-format development board. It is designed for IoT, MicroPython and Arduino programming, making it suitable for first builds through to ...

SKU: EC-WHC0012RF | Brand: Elecrow

The HC-12 is a multi-channel embedded wireless serial port module operating in the 433.4–473.0 MHz band. With up to 100 mW (20 dBm) transmit power and −117 dBm receiving sensitivity, it achieves communication distance...

SKU: SF-DEV-21252 | Brand: SparkFun

The Arduino Nano 33 BLE Sense Rev2 packs a powerful nRF52840 processor, Bluetooth 5.0, and an impressive array of on-board sensors into the compact Nano form factor. With a 9-axis IMU, microphone, gesture/light/proxim...

SKU: LB-ABX00030 | Brand: Little Bird

This compact and reliable Nano board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F.Its architecture, fully compatible with Arduino IDE Online and Offline, has ...

SKU: SF-DEV-10116 | Brand: SparkFun

The Arduino Fio (Funnel I/O) is a compact, wireless-friendly development board based on the ATmega328P. Designed by Shigeru Kobayashi and inspired by the LilyPad, the Fio includes a built-in lithium polymer battery co...

SKU: DF-TEL0162 | Brand: DFRobot

##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It exte...

SKU: ET-2075343 | Brand: Little Bird

The A000064 wireless proto shields allow an Arduino board to easily connect with an RF module, enabling wireless communication using external wireless modules. You can use the wireless module from Digi to create a ne...

SKU: TS-G50EFC56E3197F | Brand: Little Bird

The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods: Short Message Service Audio ...

SKU: RB-BLESHIELD | Brand: Little Bird

The BLE Shield adds Bluetooth Low Energy (BLE) connectivity to your Arduino, letting it communicate wirelessly with smartphones, tablets, and other BLE central devices. Compatible with Arduino Uno, Mega 2560, Leonardo...

SKU: DF-DFR0262-AC | Brand: DFRobot

The Arduino GSM Shield allows an Arduino board to connect to the internet, make and receive voice calls, and send and receive SMS messages. It uses the Quectel M10 radio modem and can be controlled via AT commands or ...