Arduino Display Modules

SKU: LB-LR0085 | Brand: Little Bird

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V ra...

SKU: DF-DFR0063 | Brand: DFRobot

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resources...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: DF-DFR0556 | Brand: DFRobot

A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...

SKU: DF-DFR0557 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains b...

SKU: DF-DFR0464 | Brand: DFRobot

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compa...

SKU: WS-29318 | Brand: Waveshare

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simpl...

SKU: DF-DFR0555 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD...

SKU: WS-30896 | Brand: Waveshare

Enhance your Raspberry Pi projects with the 3.5inch Capacitive Touch Display (F) - a remarkable small-scale visual and interactive powerhouse that brings your ideas to life with vibrant colors, precise touch control, ...

SKU: WS-30499 | Brand: Waveshare

A compact 1.47-inch IPS LCD display module with an integrated capacitive touch panel. Featuring 172×320 resolution and 262K colours, it delivers crisp, vibrant visuals with wide viewing angles in an ultra-small form f...

SKU: DF-DFR0997 | Brand: DFRobot

A 2.0-inch IPS colour display with 320 × 240 resolution and 16-bit colour depth (RGB565), supporting both I2C and UART communication via the Gravity connector. Powered by an ESP32-S3 chip with integrated LVGL graphics...

SKU: DF-DFR0936 | Brand: DFRobot

This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs,...

SKU: WS-31122 | Brand: Waveshare

A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input...

SKU: DF-DFR0175 | Brand: DFRobot

This is a new IIC LCD backpack which supports Gadgeteer interface (IDC10). It allows gadgeteer user to play with LCD160X. The IIC LCD Backpack is a small PCB that can be soldered to the back of an LCD so tha...

SKU: DF-DFR0554 | Brand: DFRobot

The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...

SKU: DF-DFR0382 | Brand: DFRobot

An Arduino-compatible shield featuring a 4-digit 7-segment digital tube display (common cathode, 0.56") with 5 input buttons. Uses I2C to drive the display, providing an easy interface for menus, controls, and numeric...

SKU: SF-LCD-13722 | Brand: SparkFun

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for ...

SKU: SF-COM-16919 | Brand: SparkFun

Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for ...

SKU: SF-COM-18565 | Brand: SparkFun

This compact white alphanumeric display gives you fourteen-segment characters for showing numbers, letters and symbols in your project. It uses the VK16K33 LED driver over I2C, so it is a neat fit for Qwiic-based buil...

SKU: SF-LCD-29986 | Brand: SparkFun

Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing extern...