Arduino Cables and Connectors

SKU: AF-5385 | Brand: Adafruit

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: AF-4524 | Brand: Adafruit

This 24-pin FFC/FPC extender lets you connect two 24-pin 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. A simple solution when your existing cable isn't long enough to reach. Key Featu...

SKU: SF-CAB-15463 | Brand: SparkFun

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cabl...

SKU: DF-FIT0586 | Brand: DFRobot

This is a CE-certified XT30 plug that is mini-sized and takes up less space. The banana plug features a true gold plating and a cross-slot design with a larger contact area that can withstand a constant 15A and peak c...

SKU: DF-FIT0773 | Brand: DFRobot

The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont port, compatible with standard breadboard pin pitch ...

SKU: DF-FIT0756 | Brand: DFRobot

This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and...

SKU: AF-4934 | Brand: Adafruit

A 2-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...

SKU: AF-4935 | Brand: Adafruit

A 3-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...

SKU: SF-CAB-18079 | Brand: SparkFun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...

SKU: DF-FIT0104 | Brand: DFRobot

A pack of ten 8-pin female headers with standard 2.54 mm pitch, designed for use with Arduino boards. These headers are ideal for replacing damaged headers, building custom shields, or prototyping on breadboards and p...

SKU: SF-PRT-08535 | Brand: SparkFun

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key F...

SKU: SF-DEV-13746 | Brand: SparkFun

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to ...

SKU: AF-62 | Brand: Adafruit

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things).3 feet / 1 meter longColor may vary!

SKU: AF-284 | Brand: Adafruit

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and ...

SKU: SF-CAB-11301 | Brand: SparkFun

A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector....

SKU: SF-DEV-12924 | Brand: SparkFun

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not on...

SKU: SF-DEV-09717 | Brand: SparkFun

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI...

SKU: DF-FIT0031 | Brand: DFRobot

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. E...

SKU: SF-CAB-25630 | Brand: SparkFun

A 1-metre USB-A to USB-C cable with a flexible silicone jacket for tangle-free cable management. Supports USB 2.0 data transfer and is ideal for charging and connecting USB-C devices to standard USB-A ports. Key Feat...