Arduino Breadboards and Prototyping Accessories

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: DF-FIT0140 | Brand: DFRobot

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...

SKU: SF-PRT-14284 | Brand: SparkFun

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female-to-female jumpers to create a ...

SKU: SF-PRT-11710 | Brand: SparkFun

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only down...

SKU: SF-COM-12792 | Brand: SparkFun

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spa...

SKU: SF-PRT-10375 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway hea...

SKU: SF-PRT-16662 | Brand: SparkFun

A 2-pack of premium 6" male-to-male jumper wires in red and black — handy for power and ground connections where colour coding matters. Stranded core for flexibility with solid male pins on both ends for a reliable fi...

SKU: SF-PRT-11269 | Brand: SparkFun

This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful fo...

SKU: SF-PRT-13268 | Brand: SparkFun

A large prototyping PCB with v-scored lines that let you snap it to any custom size. The 50 × 25 solder point array provides up to 1250 plated through-hole (PTH) pins on a 2.54 mm (0.1″) pitch grid. Simply snap along ...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0898 | Brand: DFRobot

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont m...

SKU: DF-FIT0916-MM | Brand: DFRobot

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin ta...

SKU: DF-FIT0916-M | Brand: DFRobot

These tagged Gravity cables help keep wiring clear when a project has lots of similar-looking connections. Each lead carries I2C/UART pin labels, making it easier to identify signals during wiring, testing and debuggi...

SKU: DF-FIT0916-MF | Brand: DFRobot

These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny boa...

SKU: SF-KIT-15716 | Brand: SparkFun

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your ...