All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Micro Usb Cable 80cm
SKU: LB-LR0293-3 | Brand: Little Bird
An 80 cm USB-A to Micro USB cable for data transfer and charging. Compatible with development boards such as the Arduino Leonardo, as well as Raspberry Pi, mobile devices, and other electronics that use a Micro USB co...
Delivered by Tue 8 Dec
EL Wire - White 5m With Inverter
SKU: LB-LR0281-5-W | Brand: Little Bird
This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is ...
Delivered by Tue 24 Nov
EL Wire - Yellow 5m With Inverter
SKU: LB-LR0281-5-Y | Brand: Little Bird
A 5-metre length of yellow electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that produces a bright, even glow — similar in appearance to a thin neon tu...
Delivered by Tue 8 Dec
915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi
SKU: SF-WRL-14875 | Brand: SparkFun
A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna...
Delivered by Tue 24 Nov
Snap-In Panel Mount Cable - USB C Socket to USB A Plug
SKU: AF-4052 | Brand: Adafruit
This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB...
Delivered by Tue 24 Nov
RJ-45 Ethernet Round Panel Mount Adapter Plug
SKU: AF-4130 | Brand: Adafruit
This RJ-45 round panel mount adapter provides an Ethernet pass-through connection that installs in a standard round drill hole — no rectangular cutouts or filing required. Drill a ~30 mm hole in wood, plastic, or meta...
Delivered by Tue 24 Nov
Colourful Arcade Buttons - Blue
SKU: PI-COM0404 | Brand: Pimoroni
A colourful 30 mm arcade-style pushbutton in blue. With a satisfying 2 mm travel and tactile click, these buttons are ideal for arcade builds, control panels, and interactive projects. Key Features Arcade Style – C...
Delivered by Tue 24 Nov
Potentiometer Control Rotary Knob Orange
SKU: LB-LS0067 | Brand: Little Bird
The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a rubbery grip, tweaking it is quite fulfilling This is the orange version and it has a nice...
Delivered by Tue 24 Nov
4 x AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3859 | Brand: Adafruit
A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...
Delivered by Wed 16 Dec
16mm Illuminated Pushbutton - Green Latching On/Off Switch
SKU: AF-1443 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...
Delivered by Tue 24 Nov
16mm Illuminated Pushbutton - Yellow Latching On/Off Switch
SKU: AF-1444 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...
Delivered by Tue 24 Nov
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
SKU: LB-LS0657 | Brand: Little Bird
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...
Delivered by Tue 24 Nov
Stepper Motor 42BYG
SKU: LB-LR0214-50 | Brand: Little Bird
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...
Delivered by Tue 24 Nov
Load Cell - 1kg, Straight Bar
SKU: LB-LR0400 | Brand: Little Bird
A 1kg straight bar load cell (strain gauge) that converts applied force into a measurable electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, this sensor is ideal...
Delivered by Tue 24 Nov
Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm
SKU: AF-1468 | Brand: Adafruit
Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...
Delivered by Tue 24 Nov
TrinityPixel WS2812B 5050 RGB LED Strip 5M 30LEDS Waterproof
SKU: LB-LR0281-9 | Brand: Little Bird
The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), g...
Delivered by Tue 24 Nov
3 x 18650 Battery Holder with DC2.1 Power Jack
SKU: DF-FIT0539 | Brand: DFRobot
A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronic...
Delivered by Thu 3 Dec
Panel Mount 1/8 (3.5mm) TRS Jack Connector
SKU: AF-3692 | Brand: Adafruit
What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector is known by many names, phone plug, phone jack, headphone j...
Delivered by Wed 16 Dec
40W Temperature Controlled Soldering Station
SKU: TB-TS1620 | Brand: Little Bird
An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue te...
Delivered by Tue 24 Nov
Sound module
SKU: LB-LR0240 | Brand: Little Bird
This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read th...
Delivered by Tue 24 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared