All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Weather Station Kit with Anemometer/Wind Vane/Rain Bucket
SKU: DF-SEN0186 | Brand: DFRobot
INTRODUCTION Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...
Delivered by Mon 5 Oct
4.3 Inch E-Paper 800x600
SKU: DF-DFR0369 | Brand: DFRobot
This 4.3-inch e-ink display module from DFRobot supports 800×600 resolution and communicates via serial (UART), making it straightforward to integrate with microcontrollers. It features built-in Chinese and English fo...
Delivered by Mon 5 Oct
Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter
SKU: AF-3305 | Brand: Adafruit
The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...
Delivered by Tue 27 Oct
SparkFun LED Driver Breakout - TLC5940 (16 Channel)
SKU: SF-BOB-10616 | Brand: SparkFun
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...
Delivered by Wed 14 Oct
Particle Photon
SKU: DF-DFR0373 | Brand: DFRobot
The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller ru...
Delivered by Wed 14 Oct
SparkFun Pressure Sensor Breakout - MS5803-14BA
SKU: SF-SEN-12909 | Brand: SparkFun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...
Delivered by Wed 14 Oct
Silicone Bumpers - Large (10x16.5mm, 4 pack)
SKU: SF-COM-10594 | Brand: SparkFun
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or...
Delivered by Wed 14 Oct
Encoder Adapter
SKU: DF-FIT0324 | Brand: DFRobot
INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. ...
Delivered by Wed 14 Oct
Upper Deck for MiniQ
SKU: DF-DFR0310 | Brand: DFRobot
Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket. With this upper deck you can upgrade the MiniQ with more senso...
Delivered by Wed 14 Oct
Red Electroluminescent (EL) Tape Strip - 100cm w/two connectors
SKU: AF-445 | Brand: Adafruit
EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...
Delivered by Tue 27 Oct
Micro DC Geared Motor 6V 96RPM
SKU: DF-FIT0419 | Brand: DFRobot
INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...
Delivered by Wed 14 Oct
SparkFun Sunny Buddy - MPPT Solar Charger
SKU: SF-PRT-12885 | Brand: SparkFun
This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel ...
Delivered by Wed 14 Oct
Blue Electroluminescent (EL) Tape Strip - 100cm w/two connectors
SKU: AF-447 | Brand: Adafruit
EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...
Delivered by Tue 27 Oct
BNC Connector - Right Angle
SKU: SF-PRT-10550 | Brand: SparkFun
BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing
Delivered by Wed 14 Oct
BlocklyProp Starter Kit
SKU: AF-3337 | Brand: Adafruit
Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming to...
Delivered by Tue 27 Oct
EL wire 4xAAA pocket inverter
SKU: AF-564 | Brand: Adafruit
A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightness EL wire OR 1 meter (3 feet) of EL tape OR a 10cmx10cm piece of E...
Delivered by Tue 27 Oct
RF Link Transmitter - 434MHz
SKU: SF-WRL-10534 | Brand: SparkFun
A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...
Delivered by Wed 14 Oct
RF Link Receiver - 4800bps (434MHz)
SKU: SF-WRL-10532 | Brand: SparkFun
The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...
Delivered by Wed 14 Oct
Solder Paste - 50g (Lead Free)
SKU: SF-TOL-12878 | Brand: SparkFun
This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way t...
Delivered by Wed 14 Oct
Pimoroni Rainbow HAT for Android Things™ and Raspberry Pi
SKU: AF-3354 | Brand: Adafruit
The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared