All Products

SKU: SF-PRT-08619 | Brand: SparkFun

An empty canvas for electrical enthusiasts! Designed to fit the SFE project enclosures this project board gives you 8x10cm (3.15x3.94") of building space for through-hole components with 2.54mm (100mil) spaced hole...

SKU: SF-COM-08579 | Brand: SparkFun

BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displ...

SKU: DF-DFR0220 | Brand: DFRobot

The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...

SKU: DF-SEN0057 | Brand: DFRobot

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtr...

SKU: SF-COM-12096 | Brand: SparkFun

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made spec...

SKU: SF-COM-08530 | Brand: SparkFun

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...

SKU: SF-COM-08571 | Brand: SparkFun

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 200V.Documents:Crystal Oscillator LectureSol...

SKU: SF-SEN-14032 | Brand: SparkFun

It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...

SKU: AF-2680 | Brand: Adafruit

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service a...

SKU: DF-SEN0144 | Brand: DFRobot

The Sharp GP2Y1010AU0F is a compact optical dust sensor that uses an internal infrared LED and phototransistor arranged diagonally to detect fine particles in the air. The sensor outputs an analog voltage proportional...

SKU: AF-2943 | Brand: Adafruit

This anodised aluminium chassis provides a sturdy, lightweight foundation for building your own mini robot rover. With plenty of mounting holes and slots, it's easy to configure for 2-wheel or 4-wheel designs and simp...

SKU: AF-1684 | Brand: Adafruit

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin fro...

SKU: SF-DEV-12049 | Brand: SparkFun

The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the ...

SKU: AF-2944 | Brand: Adafruit

An aluminium top plate accessory for the Mini Robot Rover Chassis, adding a second level to your robot platform. Mount electronics, batteries, or sensors on top while keeping the lower chassis clear for motors and wir...

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: SF-SEN-12040 | Brand: SparkFun

The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a sm...

SKU: DF-TEL0067 | Brand: DFRobot

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to r...

SKU: SF-BOB-08276 | Brand: SparkFun

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it b...

SKU: AF-2889 | Brand: Adafruit

One truth about working with test equipment is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block BNC (Bayonet Neill–Concelman, for those in the k...

SKU: SF-PRT-08232 | Brand: SparkFun

A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...