All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Hook-up Stranded Wire - Red (22 AWG)
SKU: SF-PRT-08865 | Brand: SparkFun
Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.
Delivered by Fri 3 Jul
SparkFun Ardumoto - Motor Driver Shield
SKU: SF-DEV-14129 | Brand: SparkFun
The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. ...
Delivered by Fri 3 Jul
Super Bright LED - Green 10mm
SKU: SF-COM-08861 | Brand: SparkFun
Huge 10mm through-hole LEDs. Features: 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-22,000 MCD output Documents: Datasheet LED Tutorial
Delivered by Wed 24 Jun
FeatherWing Proto - Prototyping Add-on For All Feather Boards
SKU: AF-2884 | Brand: Adafruit
The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad str...
Delivered by Tue 14 Jul
Super Bright LED - Blue 10mm
SKU: SF-COM-08860 | Brand: SparkFun
Huge 10mm through-hole LEDs. Mood-light an entire wall! Features: 465-470nm Blue 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 8,000-10,000 MCD output Documents: Datasheet LED Tutorial
Delivered by Fri 3 Jul
ProtoBoard - Square 2
SKU: SF-PRT-08811 | Brand: SparkFun
A 2" (50 mm) square double-sided perfboard with standard 0.1" (2.54 mm) hole spacing. Features 4-40 (3 mm) mounting holes in the corners for easy installation in enclosures or stacking multiple boards. Specifications...
Delivered by Fri 3 Jul
Gravity: Steam Sensor
SKU: DF-SEN0121 | Brand: DFRobot
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notic...
Delivered by Wed 24 Jun
NeoPixel Mini 3535 RGB LEDs w/ Integrated Driver Chip - White [Pack of 10]
SKU: AF-2659 | Brand: Adafruit
A pack of 10 miniature 3535-format (3.5 × 3.5 mm) NeoPixel RGB LEDs with white casing and integrated WS2811-compatible driver chips. These are half the size of standard 5 × 5 mm NeoPixels, making them the most compact...
Delivered by Tue 14 Jul
Adam Tech Wall Adapter Cable (EU)
SKU: SF-CAB-14093 | Brand: SparkFun
The Adam Tech Wall Adapter Cable (EU) provides a safe, ready-made connection between a European mains outlet and compatible power supplies. Terminated with a standard CEE 7/7 plug at one end and three colour-coded ins...
Delivered by Fri 3 Jul
NeoPixel Mini 3535 RGB LEDs w/ Integrated Driver Chip - Black [Pack of 10]
SKU: AF-2686 | Brand: Adafruit
Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LEDinis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. These MINI (3.5mm x 3.5mm) RGB LEDs&nbs...
Delivered by Tue 14 Jul
Prototyping Board - SOP8/SOP16/SOP28
SKU: DF-FIT0291 | Brand: DFRobot
This is a SOP8/SOP16/SOP28 to DIP16/DIP28 Adapter Board.You can change the SOP8/SOP16/SOP28 to DIP16/DIP28 packaging. So that You needn't to buy the DIP chips for prototyping specially.Just solder the SMD chips on ...
Delivered by Fri 3 Jul
Faceplate and Buttons Pack for 2.4 PiTFT HAT - Raspberry Pi A+
SKU: AF-2808 | Brand: Adafruit
Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+ case base! This Faceplate and Buttons Pack is a simple way to enclose yo...
Delivered by Tue 14 Jul
Spiral Cable Wrap (12mm)
SKU: DF-FIT0251 | Brand: DFRobot
This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is av...
Delivered by Wed 24 Jun
10 DOF Mems IMU Sensor (Arduino Compatible)
SKU: DF-SEN0140 | Brand: DFRobot
The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 1...
Delivered by Fri 3 Jul
FlexiForce Pressure Sensor - 1lb.
SKU: SF-SEN-08713 | Brand: SparkFun
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but...
Delivered by Fri 3 Jul
USB to 2.1mm DC Booster Cable - 12V
SKU: AF-2778 | Brand: Adafruit
This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power ...
Delivered by Tue 14 Jul
Full Size Wireless Keyboard with Trackpad
SKU: AF-2876 | Brand: Adafruit
A full-size wireless keyboard with slim chiclet keys and an integrated trackpad on the right-hand side. The trackpad supports both left and right clicks, eliminating the need for a separate mouse. At just 7 mm thick, ...
Delivered by Tue 14 Jul
DF15RMG Tilt Kit (20kg)
SKU: DF-SER0030 | Brand: DFRobot
This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which ...
Delivered by Fri 3 Jul
Micro Gearmotor - Enclosure
SKU: SF-ROB-12105 | Brand: SparkFun
These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advantage of the 0.77” hole pattern. These enclosures have a length of 1.14”,...
Delivered by Fri 3 Jul
JST Vertical Connector
SKU: SF-PRT-08613 | Brand: SparkFun
Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. Documents: Datasheet
Delivered by Fri 3 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
