All Products

SKU: AF-334 | Brand: Adafruit

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...

SKU: SF-SEN-13266 | Brand: SparkFun

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...

SKU: SF-BOB-13263 | Brand: SparkFun

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino board...

SKU: AF-255 | Brand: Adafruit

THIS IS THE LATEST VERSION 2.1The ChronoDot RTC is an extremely accurate real time clock module, based on the DS3231 temperature compensated RTC (TCXO). It includes a CR1632 battery, which should last at least 8 years...

SKU: AF-350 | Brand: Adafruit

The ENGINEER PA-09 is a precision micro crimping tool that makes clean, reliable crimps on the small contacts used in fine-pitch connectors — no more mangled contacts from generic pliers that crush instead of crimp. I...

SKU: SF-COM-13247 | Brand: SparkFun

This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens. These types of switches are primarily used in home security syste...

SKU: DF-DFR0228 | Brand: DFRobot

The RC Air Mouse and Keyboard uses the latest 2.4GHz wireless technology with a sampling frequency up to 120Hz. Use it like a Wii remote to control your mouse cursor on the screen. Operation is flexible and smooth ...

SKU: AF-3200 | Brand: Adafruit

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers,...

SKU: AF-360 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC white tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. It contains a Mifare Classic 1K chip with 1 KB of writable EEPROM s...

SKU: AF-362 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC sticker contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The thin adhesive-backed form factor makes it easy to stick onto equipment, packaging, shelves, or any smoo...

SKU: SF-PRT-13227 | Brand: SparkFun

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware.

SKU: AF-3195 | Brand: Adafruit

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi.  The Blinkt! provides a wash or controllable ...

SKU: SF-SEN-11084 | Brand: SparkFun

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high reso...

SKU: AF-374 | Brand: Adafruit

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontro...

SKU: DF-SER0019 | Brand: DFRobot

DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°ser...

SKU: AF-382 | Brand: Adafruit

A Zero Insertion Force (ZIF) socket for DIP chips of up to 28 pins and 0.3" width. The lever mechanism allows you to insert and remove chips without applying force, preventing bent or damaged pins. Lift the lever to o...

SKU: SF-TOL-13193 | Brand: SparkFun

A sturdy ratcheting crimping tool for making custom wiring harnesses with crimp pins and cable housings. The ratchet mechanism ensures consistent, reliable crimps every time — simply squeeze the handles until the plie...

SKU: SF-SWG-11046 | Brand: SparkFun

These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your vision… dangerously. Here our photographer, Juan, is helping our...

SKU: DF-FIT0400 | Brand: DFRobot

A compact 30× magnification loupe with built-in LED illumination for inspecting circuit boards, solder joints, fine print, and small components. The fold-out design is pocket-friendly, making it a handy tool for the w...

SKU: AF-3246 | Brand: Adafruit

A neat little breakout board designed for mounting a PSP-style mini thumbstick to your project. The board features panel-mount friendly hole placement and dual-sided headers for mechanical stability when connected to ...