All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Beaglebone Black - Rev C
SKU: SF-DEV-12857 | Brand: SparkFun
The Beaglebone Black is a low-cost credit-card-sized development platform with good support from a fast growing community. The Beaglebone Black differs slightly from the regular version by providing you with an onboar...
Delivered by Tue 6 Oct
0.1 (2.54mm) Crimp Connector Housing: 1x10-Pin 5-Pack
SKU: PL-1909 | Brand: Pololu
These ten-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire co...
Delivered by Tue 6 Oct
Liquid Pump - 350GPH (12v)
SKU: SF-ROB-10455 | Brand: SparkFun
The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation i...
Delivered by Tue 6 Oct
Nut - Metal (4-40, 10 pack)
SKU: SF-PRT-10454 | Brand: SparkFun
Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...
Delivered by Tue 6 Oct
Wire Connector Set
SKU: DF-FIT0452 | Brand: DFRobot
A 2-way lever-action wire connector made from flame-retardant material. These connectors provide a quick, solderless way to join wires — simply lift the lever, insert the stripped wire, and push the lever down to lock...
Delivered by Tue 6 Oct
GSM Antenna with Magnetic Base (3m)
SKU: DF-FIT0453 | Brand: DFRobot
A GSM antenna with SMA connector and magnetic base for easy mounting on ferrous metal surfaces. The 3 m extension cable uses 174 pure copper construction for low impedance, and the antenna provides 2.5 dBi signal gain...
Delivered by Tue 6 Oct
Solenoid - 36v
SKU: SF-ROB-10391 | Brand: SparkFun
A linear push-type solenoid rated for 36 V DC that also works well at 12 V. Solenoids produce linear motion for pushing, pulling, or actuating switches and levers. This unit has a measured throw of approximately 10 mm...
Delivered by Tue 6 Oct
Pan/Tilt Bracket
SKU: SF-ROB-10335 | Brand: SparkFun
This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis posit...
Delivered by Tue 6 Oct
Voltage Regulator - 12V
SKU: SF-COM-12766 | Brand: SparkFun
The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a rel...
Delivered by Tue 6 Oct
Built-in Spring GSM Antenna
SKU: DF-FIT0454 | Brand: DFRobot
This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use. ...
Delivered by Tue 6 Oct
DC Barrel Jack Adapter - Male
SKU: SF-PRT-10287 | Brand: SparkFun
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack...
Delivered by Tue 6 Oct
LiPower - Boost Converter
SKU: SF-PRT-10255 | Brand: SparkFun
The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection...
Delivered by Tue 6 Oct
SparkFun USB LiPoly Charger - Single Cell
SKU: SF-PRT-12711 | Brand: SparkFun
The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power inp...
Delivered by Tue 6 Oct
Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
SKU: AF-1858 | Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...
Delivered by Tue 6 Oct
3.5mm (1/8) Stereo DIY Plug
SKU: AF-1800 | Brand: Adafruit
A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to th...
Delivered by Tue 6 Oct
SparkFun LiPo Charger Basic - Micro-USB
SKU: SF-PRT-10217 | Brand: SparkFun
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells ...
Delivered by Tue 6 Oct
EL Wire - Orange 3m
SKU: SF-COM-10193 | Brand: SparkFun
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below f...
Delivered by Tue 6 Oct
EL Wire - Pink 3m
SKU: SF-COM-10198 | Brand: SparkFun
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below f...
Delivered by Tue 6 Oct
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
SKU: AF-3420 | Brand: Adafruit
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...
Delivered by Tue 6 Oct
EL Wire - Blue 3m
SKU: SF-COM-10195 | Brand: SparkFun
A 3-metre length of blue electroluminescent (EL) wire that produces a bright, even neon-like glow when driven by an AC inverter. The flexible, phosphor-coated wire is 2.3 mm in diameter and terminated with a JST PH co...
Delivered by Tue 6 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared