All Products

SKU: EF-EF08198 | Brand: ElecFreaks

Smart home Kit is a product about smart home project base on micro:bit which is developed by ELECFREAK. We selected executed components commonly used at home as TMP36 temperature sensor, sound sensor, crash sensor,...

SKU: EF-EF11096 | Brand: ElecFreaks

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices ...

SKU: AF-4383 | Brand: Adafruit

The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibr...

SKU: LB-LAMP-PCB | Brand: Little Bird

This DIY Lamp Kit PCB provides a simple platform for building your own custom LED lamp. The board has pads for up to 8 LEDs wired in series, a switch, a current-limiting resistor, and a power input — giving you comple...

SKU: DF-DFR0566 | Brand: DFRobot

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sens...

SKU: DF-TEL0124 | Brand: DFRobot

The SIM7600CE-T 4G(LTE) Shield is a compact 4G/3G/2G communication and GNSS positioning module in an Arduino-compatible shield form factor. About the size of a credit card, it plugs directly into Arduino UNO, Leonardo...

SKU: AF-4280 | Brand: Adafruit

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are nee...

SKU: SF-CAB-15364 | Brand: SparkFun

A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. ...

SKU: AF-4252 | Brand: Adafruit

This plastic adapter connects a micro servo to LEGO-compatible cross axle parts such as gears, wheels, and beams. Simply push the adapter's spline housing onto the shaft of a compatible micro servo, and the other end ...

SKU: LB-LR0281-5-FG | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows yellow when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire i...

SKU: AF-4187 | Brand: Adafruit

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination se...

SKU: AF-4226 | Brand: Adafruit

The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it hand...

SKU: EF-EF09083 | Brand: ElecFreaks

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. T...

SKU: LB-ALICE-KIT | Brand: Little Bird

The micro:bit in Wonderland - Basic Companion Kit  was created to contain all of the necessary components needed to complete the projects in the micro:bit in Wonderland book. It's a project book where you read a ...

SKU: EF-EF08201 | Brand: ElecFreaks

The Ring:bit Car is a small DIY smart car driven by the BBC micro:bit and the Ring:bit. The Ring:bit extends the micro:bit's 3 GPIO ports and allow for different sensors and components to be easily attached to the ...

SKU: DF-ROB0150 | Brand: DFRobot

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion boar...

SKU: PI-COM0302 | Brand: Pimoroni

Transistor are a type of electronic switch used for controlling the flow of a circuit and amplifying signals.They have three legs: the base, the collector, and the emitter.NPN: When a voltage is applied to the base le...

SKU: DF-DFR0555 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD...

SKU: AF-3483 | Brand: Adafruit

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it's extremely flexible and can take on nearly any shape. You can solder to it, and the tape itself can car...

SKU: LB-CTC-2018 | Brand: Little Bird

This kit contains everything you need for the "Crack the Code" segment in the NSW technology curriculum and a few spares of the easy to lose components. Products may vary from images but will ensure they are suitabl...