All Products

SKU: WS-24166 | Brand: Waveshare

The 6W Monocrystalline Solar Panel from Waveshare delivers 5.5V output through high-efficiency monocrystalline silicon cells, encased in toughened glass for durability and weather resistance. It features both Micro US...

SKU: TB-MP3146 | Brand: Little Bird

Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a ...

SKU: WS-26379 | Brand: Waveshare

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2...

SKU: AF-5200 | Brand: Adafruit

The Adafruit PiCowbell Proto is a prototyping add-on board for the Raspberry Pi Pico and Pico W. It matches the Pico's footprint and sockets underneath, giving you a reset button, a STEMMA QT / Qwiic I2C connector, an...

SKU: WS-25509 | Brand: Waveshare

The Waveshare Pico-DVI-LCD is a 7" IPS display module designed for the Raspberry Pi Pico. Featuring 1024×600 resolution and a 170° viewing angle, it connects via DVI interface for high-speed communication and includes...

SKU: WS-25553 | Brand: Waveshare

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...

SKU: WS-25515 | Brand: Waveshare

Round 2D Codes Scanner Module, Barcode/QR code Reader, With LED Indicator, Small Size, Easy to Integrate 2D Codes Scanner Module  1D/2D Codes Recognition | Small Size | Screen scanning   The Barcode ...

SKU: WS-24783 | Brand: Waveshare

This 4.3" QLED display from Waveshare connects to Raspberry Pi via the DSI interface, providing a high-quality touchscreen with a single ribbon cable connection. The QLED (Quantum Dot LED) panel delivers a wider colou...

SKU: DF-SEN0572 | Brand: DFRobot

The Fermion MEMS H2 Sensor is a compact hydrogen gas detection module using micro-electromechanical system (MEMS) technology. It provides qualitative measurement of hydrogen concentration from 0.1 to 1000 ppm via an a...

SKU: DF-SEN0564 | Brand: DFRobot

The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...

SKU: EF-EF08278 | Brand: ElecFreaks

Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...

SKU: LB-LS5174 | Brand: Little Bird

An HDMI 2.1 cable supporting resolutions up to 8K at 60 Hz, with backward compatibility for 4K at 120 Hz and lower resolutions. Constructed with PVC-jacketed copper conductors for reliable signal transmission. Specif...

SKU: KI-56115 | Brand: Kitronik

The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any addit...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: KI-5331 | Brand: Kitronik

This board allows the Raspberry Pi Pico (connected via pin header) to drive two motors simultaneously with full forward, reverse & stop control, making it ideal for Pico controlled buggy projects. Alternatively, the b...

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: SF-COM-21256 | Brand: SparkFun

The SparkFun BabyBuck Regulator Breakout delivers a regulated 5V output from a 6–32V input in an ultra-compact 0.63" × 0.52" form factor. Based on the AP63357 synchronous buck converter from Diodes Inc., it provides u...

SKU: DF-DFR1030 | Brand: DFRobot

This is a Linear array solid LiDAR. Based on the principle of Triangulation, it is equipped with related optics, electricity, and algorithm design, to achieve 100 degrees of high-precision laser distance measurement, ...

SKU: LB-LS4650 | Brand: Little Bird

This flat and dense vise is great because your hands can rest directly on the work table, allowing you to steady yourself with minimal effort for precise soldering and probing. The thick metal plate keeps it from...