All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Thu 2 Jul
SparkFun Environmental Sensor - BME688 (Qwiic)
SKU: SF-SEN-19096 | Brand: SparkFun
The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...
Delivered by Fri 12 Jun
Adafruit PCF8523 Real Time Clock Breakout Board
SKU: AF-5189 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard he...
Delivered by Thu 2 Jul
SparkFun QwiicBus - EndPoint
SKU: SF-COM-16988 | Brand: SparkFun
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential si...
Delivered by Tue 23 Jun
SparkFun Air Quality Sensor - SGP40 (Qwiic)
SKU: SF-SEN-18345 | Brand: SparkFun
The SparkFun SGP40 Air Quality Sensor measures volatile organic compound (VOC) levels in indoor environments using Sensirion's CMOSens technology. The metal oxide (MOx) sensor with a temperature-controlled micro hotpl...
Delivered by Tue 23 Jun
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Thu 2 Jul
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
SKU: AF-4903 | Brand: Adafruit
The Adafruit ISO1540 Bidirectional I2C Isolator provides full electrical isolation between two sides of an I2C bus, using the TI ISO1540 chip with 2500 V-RMS isolation. It's ideal for separating earth-grounded circuit...
Delivered by Thu 2 Jul
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4821 | Brand: Adafruit
The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...
Delivered by Thu 2 Jul
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Fri 12 Jun
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
SKU: AF-4692 | Brand: Adafruit
The Adafruit LSM6DSO32 is a 6 Degree of Freedom (6-DoF) IMU featuring a triple-axis accelerometer with an extended ±32g range and a triple-axis gyroscope. It shares the same pinout and firmware compatibility as the LS...
Delivered by Thu 2 Jul
SparkFun Qwiic MicroPressure Sensor
SKU: SF-SEN-16476 | Brand: SparkFun
The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's MPR Series piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a wide pressure sensing range of 60mbar to ...
Delivered by Tue 23 Jun
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals)
SKU: SF-SEN-16295 | Brand: SparkFun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...
Delivered by Fri 12 Jun
SparkFun Environmental Sensor Breakout - BME680 (Qwiic)
SKU: SF-SEN-16466 | Brand: SparkFun
A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...
Delivered by Tue 23 Jun
SparkFun Qwiic Button Breakout
SKU: SF-BOB-15931 | Brand: SparkFun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those ...
Delivered by Fri 12 Jun
Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT
SKU: AF-4415 | Brand: Adafruit
The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...
Delivered by Thu 2 Jul
SparkFun RedBoard Artemis
SKU: SF-DEV-15444 | Brand: SparkFun
The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws...
Delivered by Fri 12 Jun
Adafruit ATECC608 Breakout Board - STEMMA QT / Qwiic
SKU: AF-4314 | Brand: Adafruit
The Adafruit ATECC608 Breakout provides hardware-based cryptographic security for your microcontroller projects. This crypto-authentication chip from Microchip stores private keys securely — once locked, the keys cann...
Delivered by Thu 2 Jul
SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)
SKU: SF-DEV-15334 | Brand: SparkFun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channe...
Delivered by Tue 23 Jun
Adafruit 7-Segment Backpack - 1.2 Tall Digits
SKU: AF-1271 | Brand: Adafruit
Drive large 1.2" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The updated design includes a built-in 5V boost converter so you get bright, consistent LED segments even when running from 3.3...
Delivered by Thu 2 Jul
Qwiic JST Connector - SMD 4-pin
SKU: SF-PRT-14417 | Brand: SparkFun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
