All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
SKU: AF-4681 | Brand: Adafruit
The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or ...
Delivered by Fri 12 Jun
Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic
SKU: AF-4366 | Brand: Adafruit
The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-...
Delivered by Fri 12 Jun
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
SKU: SF-SEN-15335 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...
Delivered by Fri 12 Jun
Adafruit Triple-axis Magnetometer - LIS3MDL
SKU: AF-4479 | Brand: Adafruit
The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...
Delivered by Fri 12 Jun
Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4867 | Brand: Adafruit
The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated...
Delivered by Fri 12 Jun
Adafruit I2C Stemma QT Rotary Encoder Breakout with Encoder
SKU: AF-5880 | Brand: Adafruit
The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmwa...
Delivered by Fri 12 Jun
Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT
SKU: AF-5325 | Brand: Adafruit
The Adafruit QT Py ESP32-S2 combines Wi-Fi connectivity with native USB in the compact QT Py form factor. Built around the ESP32-S2 — a single-core 240 MHz Tensilica processor with 4 MB flash and 2 MB PSRAM — this boa...
Delivered by Fri 12 Jun
Adafruit Trinkey QT2040 - RP2040 USB Key with Stemma QT
SKU: AF-5056 | Brand: Adafruit
The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory in...
Delivered by Fri 12 Jun
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic
SKU: AF-4632 | Brand: Adafruit
The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connec...
Delivered by Fri 12 Jun
SparkFun RedBoard Qwiic
SKU: SF-DEV-15123 | Brand: SparkFun
The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "...
Delivered by Fri 12 Jun
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
SKU: AF-5743 | Brand: Adafruit
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of you...
Delivered by Fri 12 Jun
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc
SKU: AF-5648 | Brand: Adafruit
The Adafruit STEMMA MOSFET Driver makes it safe and simple to control motors, solenoids, high-power LEDs, and other current-hungry loads from any microcontroller. Instead of wiring up a transistor and flyback diode on...
Delivered by Fri 12 Jun
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
SKU: AF-4831 | Brand: Adafruit
The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...
Delivered by Fri 12 Jun
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
SKU: AF-4716 | Brand: Adafruit
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...
Delivered by Fri 12 Jun
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 - STEMMA QT / Qwiic
SKU: AF-4646 | Brand: Adafruit
The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...
Delivered by Fri 12 Jun
Adafruit AS7341 10-Channel Light / Color Sensor Breakout - STEMMA QT / Qwiic
SKU: AF-4698 | Brand: Adafruit
The Adafruit AS7341 is a 10-channel multi-spectral light sensor that detects not just the amount of light present, but the specific wavelengths — giving you far more detailed colour information than a simple RGB senso...
Delivered by Fri 12 Jun
SparkFun OpenLog Artemis (without IMU)
SKU: SF-DEV-19426 | Brand: SparkFun
The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-en...
Delivered by Fri 12 Jun
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic
SKU: AF-4701 | Brand: Adafruit
The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This make...
Delivered by Fri 12 Jun
Interstate 75 W (RP2350) - RGB LED Matrix Driver
SKU: PR-PIM727 | Brand: Pimoroni
An all-in-one, RP2350 powered controller for HUB75 LED matrix panels. Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're the chainable LED panels that you sometimes see making up vi...
Delivered by Fri 12 Jun
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
