All Products

SKU: DF-SEN0246 | Brand: DFRobot

With an internal temperature compensation and accurate distance detection, URM08-RS485 is a combination of temperature measurement device and distance inspection tool. The inner is fully enclosed and the external is m...

SKU: DF-SEN0300 | Brand: DFRobot

A high-performance waterproof ultrasonic distance sensor with an enclosed probe, capable of measuring distances from 270 mm to 8000 mm. Based on ultrasonic echo ranging, it determines distance by measuring the time be...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: DF-SEN0268 | Brand: DFRobot

The MB8450 is a weather-resistant ultrasonic car detection sensor with centimetre resolution and a range of 500–5000 mm. It connects via USB Micro-B for simple interfacing and is factory calibrated for reliable long-r...

SKU: AF-4346 | Brand: Adafruit

The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...

SKU: SF-DEV-15442 | Brand: SparkFun

The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the...

SKU: AF-4363 | Brand: Adafruit

Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...

SKU: DF-SEN0267 | Brand: DFRobot

The MB7789 4-20SC-MaxSonar-WRMI is a rugged, weather-resistant ultrasonic distance sensor with self-cleaning capability, designed for outdoor applications in high-moisture or condensation-prone environments. It provid...

SKU: DF-SEN0279 | Brand: DFRobot

The MB1414 USB-ProxSonar-EZ1 is an ultrasonic proximity and range sensor with a USB interface. It provides both proximity detection (target enter/exit a calibrated zone) and distance measurement with 1-inch resolution...

SKU: AF-4285 | Brand: Adafruit

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: AF-4264 | Brand: Adafruit

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your...

SKU: AF-4201 | Brand: Adafruit

Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: AF-3877 | Brand: Adafruit

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioni...

SKU: AF-4224 | Brand: Adafruit

The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...

SKU: EF-EF11083 | Brand: ElecFreaks

The Octopus Dust Sensor Module features the Sharp GP2Y1010AU0F optical dust sensor, capable of detecting fine particles with a diameter as small as 0.8 μm. It uses an infrared LED and phototransistor to measure dust d...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: DF-DFR0583 | Brand: DFRobot

  FEATURES     APPLICATIONS     Obstacle Avoidance Autonomous Mapping Route Planning Navigation    SPECIFICATION     Model: RPLDIAR-A3 Distance Range: 0.15 - 25 m Angula...

SKU: DF-DFR0554 | Brand: DFRobot

The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...

SKU: AF-4404 | Brand: Adafruit

These reflectance sensors feature a linear array of IR emitter/phototransistor pair modules in a high-density (4 mm pitch) arrangement, which makes them well suited for applications that require precise detection...