All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Force Sensitive Resistor - Long
SKU: SF-SEN-09674 | Brand: SparkFun
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area....
Delivered by Tue 23 Jun
USB to TTL Converter (CP210)
SKU: DF-TEL0010 | Brand: DFRobot
This USB to TTL converter combine the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to TTL/CMOS compatible levels and vice versa. It can be use...
Delivered by Tue 23 Jun
Gravity: Heart Rate Monitor Sensor For Arduino
SKU: DF-SEN0203 | Brand: DFRobot
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor which is developed based on PPG (PhotoPlethysmoGraphy) techniques. This ...
Delivered by Tue 23 Jun
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
SKU: DF-TEL0111 | Brand: DFRobot
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...
Delivered by Tue 23 Jun
Gravity: UART Infrared CO2 Sensor (0-50000ppm), air sensor
SKU: DF-SEN0220 | Brand: DFRobot
The Gravity UART Infrared CO2 Sensor uses non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations from 0 to 50,000 ppm. It offers excellent selectivity with no oxygen dependency, built-in te...
Delivered by Tue 23 Jun
IR Reflectance Sensor - QRE1113
SKU: SF-COM-09542 | Brand: SparkFun
The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...
Delivered by Tue 23 Jun
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Fri 12 Jun
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Fri 12 Jun
Methane CNG Gas Sensor - MQ-4
SKU: SF-SEN-09404 | Brand: SparkFun
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from ...
Delivered by Fri 12 Jun
Touch screen (Nintendo DSL digitizer)
SKU: AF-333 | Brand: Adafruit
A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins...
Delivered by Thu 2 Jul
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
SKU: AF-5606 | Brand: Adafruit
The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single c...
Delivered by Thu 2 Jul
Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery Monitor
SKU: AF-5580 | Brand: Adafruit
The Adafruit MAX17048 LiPoly/LiIon Fuel Gauge and Battery Monitor gives you accurate battery voltage and charge percentage readings for your 1S 3.7–4.2V lithium polymer or lithium ion battery. Instead of guessing rema...
Delivered by Thu 2 Jul
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Fri 12 Jun
Foldable Wireless Bluetooth Keypad with Touchpad
SKU: LB-LS7688 | Brand: Little Bird
Folding Bluetooth Keyboard: Enjoy true portability with an ultra-slim, foldable keyboard that fits easily into a pocket or bag. Ideal for travel and business trips, with an integrated touchpad and support for iOS vers...
Delivered by Fri 12 Jun
IR Thermal Imaging Camera Module – 80x62, Motion Detection, SPI/I2C, Raspberry Pi Compatible, 44° FOV
SKU: WS-31940 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 3 Jul
Thermal Imaging Camera Module LWIR – 80x62, SPI/I2C, Raspberry Pi Compatible, 90° FOV
SKU: WS-31941 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 3 Jul
Witty Pi 4 HAT - RTC & Power Management for Raspberry Pi
SKU: AF-5704 | Brand: Adafruit
The Witty Pi 4 is a Raspberry Pi HAT that adds a precision real-time clock, power management, and scheduling capabilities. Define ON/OFF sequences to significantly reduce energy usage in battery-powered systems, or us...
Delivered by Thu 2 Jul
ELECFREAKS micro:bit Nezha Pro Ocean Kit
SKU: EF-EF08436 | Brand: ElecFreaks
The ELECFREAKS micro:bit Nezha Pro Ocean Kit is an ocean-themed STEM education kit that guides students through Ian's ocean adventure storyline with a project-based learning approach. Using electronic components and b...
Delivered by Fri 12 Jun
Waveshare SK18 AI Voice Control Panel - 18 Macro Keys, Linux/QMK, AIDA64 Support
SKU: WS-32839 | Brand: Waveshare
The Waveshare SK18 is a multi-functional macro keyboard featuring 18 LCD keys, AI voice control, and smart home integration. Each key has its own 158×158 pixel display that can show custom icons, animations, or combin...
Delivered by Fri 12 Jun
Dual Fan with 1M USB cable - 70x70x15mm
SKU: LB-LS7583 | Brand: Little Bird
A compact dual-fan cooling module for enclosures, 3D-printed builds, network gear, and DIY electronics. Two matched 70×70×15mm fans provide effective airflow and heat dissipation, powered via USB for simple plug-and-g...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared