All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Rotary Encoder
SKU: SF-COM-09117 | Brand: SparkFun
This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...
Delivered by Fri 12 Jun
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Fri 12 Jun
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
SKU: DF-DFR0323 | Brand: DFRobot
The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming ov...
Delivered by Tue 23 Jun
Bluno Nano - An Arduino Nano with Bluetooth 4.0
SKU: DF-DFR0296 | Brand: DFRobot
The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless pro...
Delivered by Fri 12 Jun
Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle
SKU: DF-TEL0087 | Brand: DFRobot
Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you coul...
Delivered by Fri 12 Jun
SparkFun Single Lead Heart Rate Monitor - AD8232
SKU: SF-SEN-12650 | Brand: SparkFun
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...
Delivered by Fri 12 Jun
FireBeetle 2 ESP32-C6 IoT Development Board for Smart Home Control System
SKU: DF-DFR1075 | Brand: DFRobot
The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standar...
Delivered by Fri 12 Jun
ELECFREAKS Wukong2040 Breakout Board For Raspberry Pi Pico
SKU: EF-EF02054 | Brand: ElecFreaks
DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...
Delivered by Fri 12 Jun
ESP32-H2-DevKitM-1 - 4 MB Flash
SKU: AF-5715 | Brand: Adafruit
The ESP32-H2-DevKitM-1 is an entry-level development board based on the ESP32-H2-MINI-1 module, featuring Bluetooth Low Energy 5, IEEE 802.15.4, Thread, Matter, and Zigbee support on a single chip. It's an ultra-low-p...
Delivered by Fri 12 Jun
Adafruit IoT Button with NeoPixel BFF Add-On for QT Py and Xiao
SKU: AF-5666 | Brand: Adafruit
The Adafruit IoT Button with NeoPixel BFF adds a chunky 12 mm tactile button and an RGB NeoPixel to any QT Py or Xiao development board. It's a quick way to build simple IoT button projects with visual feedback — pres...
Delivered by Fri 12 Jun
Mini PIR Sensor with Time and Sensitivity Control - BS612
SKU: AF-5578 | Brand: Adafruit
The BS612 is a compact, fully configurable mini PIR motion sensor that detects movement from approximately 3–8 metres away with a 120° detection spread. Its small form factor makes it ideal for unobtrusive motion-sens...
Delivered by Fri 12 Jun
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
SKU: DF-DFR0896 | Brand: DFRobot
The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...
Delivered by Fri 12 Jun
5.8GHz Microwave Radar Module
SKU: DF-SEN0521 | Brand: DFRobot
The 5.8GHz Microwave Radar Module is a high-sensitivity motion detection sensor that transmits and receives 5.8GHz electromagnetic waves. By analysing the difference between transmitted and reflected signals, it relia...
Delivered by Tue 23 Jun
Gravity: 360 Degree Rotary Encoder Module
SKU: DF-SEN0502 | Brand: DFRobot
This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...
Delivered by Fri 12 Jun
12mm Momentary Push Button Dome with Wires - White
SKU: LB-LS3381-W | Brand: Little Bird
A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features ...
Delivered by Fri 12 Jun
Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port
SKU: AF-5348 | Brand: Adafruit
The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for signif...
Delivered by Fri 12 Jun
Ethernet RJ45 Female Plug Terminal Block
SKU: DF-FIT0849 | Brand: DFRobot
This Ethernet RJ45 Female Plug to 8-Pin Terminal Block provides a solder-free way to break out an RJ45 Ethernet connection to individual screw terminals. The standard RJ45 port features a metal shielding layer for ele...
Delivered by Fri 12 Jun
Simple USB C Socket Breakout
SKU: AF-5180 | Brand: Adafruit
This Simple USB Type C breakout is kinda interesting, it looks similar to this USB Type C SMT Inline Breakout Board, but it's an 'inline' style with pads for soldering to the common USB 1.1/2.0 connections. We se...
Delivered by Thu 2 Jul
Temperature Sensor - High Temperature, Waterproof (DS18B20)
SKU: SF-SEN-18367 | Brand: SparkFun
A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...
Delivered by Fri 12 Jun
Audio Stereo Decoder Module Board 3.3V - 5V
SKU: LB-LS1891 | Brand: Little Bird
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
