All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
SKU: AF-2348 | Brand: Adafruit
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...
Delivered by Fri 12 Jun
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
SKU: AF-3297 | Brand: Adafruit
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...
Delivered by Thu 2 Jul
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface [PCA9685]
SKU: AF-815 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...
Delivered by Thu 2 Jul
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
SKU: AF-3416 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...
Delivered by Fri 12 Jun
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
SKU: AF-807 | Brand: Adafruit
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally ...
Delivered by Fri 12 Jun
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
SKU: AF-1438 | Brand: Adafruit
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. D...
Delivered by Thu 2 Jul
Adafruit DRV2605L Haptic Motor Controller
SKU: AF-2305 | Brand: Adafruit
The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...
Delivered by Fri 12 Jun
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
SKU: AF-2448 | Brand: Adafruit
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel ...
Delivered by Fri 12 Jun
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc
SKU: AF-5648 | Brand: Adafruit
The Adafruit STEMMA MOSFET Driver makes it safe and simple to control motors, solenoids, high-power LEDs, and other current-hungry loads from any microcontroller. Instead of wiring up a transistor and flyback diode on...
Delivered by Fri 12 Jun
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
SKU: AF-2927 | Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 ...
Delivered by Fri 12 Jun
Adafruit TMC2209 Stepper Motor Driver Breakout Board
SKU: AF-6121 | Brand: Adafruit
The Adafruit TMC2209 Stepper Motor Driver Breakout Board makes controlling stepper motors easy and virtually silent. Using Trinamic's "Stealth Chopper" technology, this driver delivers smooth, quiet microstepping with...
Delivered by Fri 12 Jun
L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh
SKU: AF-4489 | Brand: Adafruit
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...
Delivered by Fri 12 Jun
Adafruit CRICKIT for Circuit Playground Express
SKU: AF-3093 | Brand: Adafruit
The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoP...
Delivered by Thu 2 Jul
Adafruit CRICKIT for micro:bit
SKU: AF-3928 | Brand: Adafruit
The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...
Delivered by Fri 12 Jun
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
SKU: AF-2928 | Brand: Adafruit
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...
Delivered by Fri 12 Jun
Adafruit A4988 Stepper Motor Driver Breakout Board
SKU: AF-6109 | Brand: Adafruit
The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making ...
Delivered by Thu 2 Jul
Adafruit CRICKIT HAT for Raspberry Pi
SKU: AF-3957 | Brand: Adafruit
The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted Neo...
Delivered by Thu 2 Jul
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
SKU: AF-5466 | Brand: Adafruit
A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowere...
Delivered by Thu 2 Jul
Adafruit Bonsai Buckaroo - micro:bit & CLUE Plant Care Helper
SKU: AF-4534 | Brand: Adafruit
The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...
Delivered by Thu 2 Jul
Geared DC Motor with Magnetic Encoder Outputs - 7 VDC 1:20 Ratio
SKU: AF-4416 | Brand: Adafruit
This geared DC motor comes with a built-in magnetic encoder — a magnetic wheel and two Hall effect sensors are already attached to the motor body, giving you quadrature feedback for both speed and direction without an...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
