All Products

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: AF-5506 | Brand: Adafruit

Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED noodles, in different lengths and colors. All are no...

SKU: AF-5134 | Brand: Adafruit

THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this Rotating LED Warning Light with Adjustable Volume Buzzer Alarm, you can monitor and easily alert humanoids as to the st...

SKU: AF-4776 | Brand: Adafruit

These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project. These little PCBs are only 9.1mm x 9.1mm and have two sets of three pads on the back for soldering wires. These ultra...

SKU: AF-4684 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, the...

SKU: AF-1429 | Brand: Adafruit

Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...

SKU: AF-6066 | Brand: Adafruit

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not be...

SKU: AF-5975 | Brand: Adafruit

A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works...

SKU: AF-5752 | Brand: Adafruit

The Adafruit I2C Quad Rotary Encoder Breakout lets you read up to four rotary encoders from a single board over I2C. An onboard microcontroller running Adafruit's seesaw firmware handles all pulse tracking, debouncing...

SKU: AF-5490 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5351 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: AF-4991 | Brand: Adafruit

The Adafruit I2C QT Rotary Encoder Breakout takes the hassle out of working with rotary encoders. An onboard microcontroller running Adafruit's seesaw firmware handles all the pulse tracking, debouncing, and pin manag...

SKU: AF-4202 | Brand: Adafruit

Need some miniature indicators? We are big fans of these diffused LEDs. They are fairly bright, so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your...

SKU: AF-2856 | Brand: Adafruit

A ring of 16 individually addressable RGBW NeoPixel LEDs (SK6812 5050 package) arranged in a 44.5 mm outer diameter circle. Each LED contains four emitters — red, green, blue, and a dedicated cool white (~6000 K) — pr...

SKU: AF-1559 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em and save a pretty penny while you're ...

SKU: AF-1547 | Brand: Adafruit

A strand of 20 digitally-controllable RGB LED pixel dots, each containing three 5050 RGB LEDs and a WS2801 controller chip. The pixels are encased in translucent white 30mm domes for weatherproof operation and even 18...

SKU: AF-2345 | Brand: Adafruit

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can k...

SKU: AF-2946 | Brand: Adafruit

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...

SKU: AF-778 | Brand: Adafruit

A pack of 25 diffused white 3 mm LEDs — bright enough to be visible in daylight and with a wide viewing angle thanks to the diffused lens. They fit easily into breadboards and are perfect for indicators, status lights...

SKU: AF-5510 | Brand: Adafruit

nOOds are ultra-flexible LED filaments — the same type found inside decorative Edison-style LED bulbs, but available as standalone strips for your own projects. This 300 mm pink nOOd is made of dozens of parallel LED ...