All Products

SKU: AF-3646 | Brand: Adafruit

Precision-machined Swiss-pin female socket headers for a tight, reliable fit. Unlike standard stamped-metal headers, Swiss-pin sockets use machined round contacts that grip the matching Swiss-pin male plugs securely —...

SKU: AF-973 | Brand: Adafruit

A 50 cm (19.5″) servo extension cable for extending the reach of standard 3-pin servo connections. It features a shrouded male connector on one end and a female connector on the other, with red/black/white colour codi...

SKU: AF-1196 | Brand: Adafruit

A 12-wire slip ring assembly that allows continuous 360° rotation while maintaining electrical continuity. The gold-plated internal contacts ensure reliable signal and power transfer across all 12 colour-coded wire se...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: AF-1494 | Brand: Adafruit

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and s...

SKU: AF-1658 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This h...

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-2003 | Brand: Adafruit

Super-flexible, silicone-sheathed stranded-core wire in black. The silicone insulation is incredibly soft and supple, making this wire ideal for wearable electronics, robotics, and any project where the wiring needs t...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: AF-2672 | Brand: Adafruit

These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be ...

SKU: AF-2888 | Brand: Adafruit

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals,...

SKU: AF-80 | Brand: Adafruit

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly ...

SKU: AF-3118 | Brand: Adafruit

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of terminal blocks that you can use with stranded or s...

SKU: AF-3123 | Brand: Adafruit

The DE-9 (DB-9) Male Plug to Terminal Block Breakout makes it easy to create custom DE-9 cables or interfaces without soldering a connector. A solid PCB breaks out all nine pins of the DE-9 plug to screw terminal bloc...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-3318 | Brand: Adafruit

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, Be...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...