All Products

SKU: AF-80 | Brand: Adafruit

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly ...

SKU: AF-3157 | Brand: Adafruit

This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video...

SKU: AF-3118 | Brand: Adafruit

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of terminal blocks that you can use with stranded or s...

SKU: AF-3123 | Brand: Adafruit

The DE-9 (DB-9) Male Plug to Terminal Block Breakout makes it easy to create custom DE-9 cables or interfaces without soldering a connector. A solid PCB breaks out all nine pins of the DE-9 plug to screw terminal bloc...

SKU: AF-3125 | Brand: Adafruit

Make your own custom DE-15 cable or DE-15 interface with ease, using this DE-15 Plug to Terminal Block Breakout. You get a nice solid PCB with a DE-15 plug and two strips of terminal blocks that you can use with st...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-3318 | Brand: Adafruit

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, Be...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...

SKU: AF-1991 | Brand: Adafruit

That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain.  The antenna juts out...

SKU: AF-2098 | Brand: Adafruit

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The...

SKU: AF-908 | Brand: Adafruit

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box.The j...

SKU: AF-3554 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...

SKU: AF-3558 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...

SKU: AF-3563 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: AF-6412 | Brand: Adafruit

We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some build...

SKU: AF-6182 | Brand: Adafruit

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and se...

SKU: AF-6070 | Brand: Adafruit

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so...