All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
SKU: SF-ROB-22132 | Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...
Delivered by Wed 2 Dec
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Mon 23 Nov
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Tue 15 Dec
Adafruit Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM
SKU: AF-5500 | Brand: Adafruit
The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding ...
Delivered by Tue 15 Dec
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Mon 23 Nov
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Mon 23 Nov
ESP32-S3-DevKitC-1 Development Board
SKU: DF-DFR0895 | Brand: DFRobot
The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware accel...
Delivered by Wed 2 Dec
ALFA Network WiFi HaLow HAT
SKU: SF-WRL-19956 | Brand: SparkFun
The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication...
Delivered by Wed 2 Dec
SparkFun Atmospheric Sensor Breakout - BME280 (with Headers)
SKU: SF-SEN-13905 | Brand: SparkFun
The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature in a compact package. This version comes with headers pre-soldered for easy breadboard use or direct wir...
Delivered by Wed 2 Dec
SOIC 8-Pin Test Clip to DIP Adapter
SKU: AF-5315 | Brand: Adafruit
An 8-pin SOIC test clip with a DIP breadboard adapter, designed for in-circuit probing and programming of flash memory, EEPROMs, and other 8-SOIC ICs — no soldering or desoldering required. Simply clip onto the chip t...
Delivered by Tue 15 Dec
0.96" 160x80 Color SPI TFT Display
SKU: DF-DFR0847 | Brand: DFRobot
This 0.96″ 160×80 Colour TFT Display delivers vibrant 16-bit (RGB565) colour output in an ultra-compact form factor. With an edge-to-edge design and a tiny 13.5 × 34 mm footprint, it is well suited for wearable device...
Delivered by Mon 23 Nov
ESP32 WROOM MCU Module - 16MB (PCB Antenna)
SKU: SF-WRL-17830 | Brand: SparkFun
The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music stre...
Delivered by Mon 23 Nov
SparkFun Thing Plus - ESP32-S2 WROOM
SKU: SF-WRL-17743 | Brand: SparkFun
The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...
Delivered by Wed 2 Dec
ESP32-S2-DevKitM-1 Development Board
SKU: DF-DFR0813 | Brand: DFRobot
The ESP32-S2-DevKitM-1 is an entry-level development board built around the ESP32-S2-MINI-1 module. It features a single-core Xtensa LX7 processor with Wi-Fi connectivity, 4MB SPI flash, and most I/O pins broken out t...
Delivered by Wed 2 Dec
SparkFun 20x4 SerLCD - RGB Backlight (Qwiic)
SKU: SF-LCD-16398 | Brand: SparkFun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB de...
Delivered by Wed 2 Dec
ESP-PSRAM64H Chip - 64 Mbit Serial Psuedo SRAM - 3.3V 133 MHz
SKU: AF-4677 | Brand: Adafruit
The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated...
Delivered by Tue 15 Dec
1.54 240x240 IPS TFT LCD Display with MicroSD Card Breakout
SKU: DF-DFR0649 | Brand: DFRobot
A 1.54-inch IPS TFT LCD breakout with 240×240 resolution, 16-bit colour (RGB565), and an onboard microSD card slot for storing and displaying images. The ST7789 driver communicates via SPI or DFRobot's GDI interface f...
Delivered by Wed 2 Dec
SparkFun Environmental Sensor Breakout - BME680 (Qwiic)
SKU: SF-SEN-16466 | Brand: SparkFun
A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...
Delivered by Wed 2 Dec
Serial Flash Memory - W25Q32FV (32Mb, 104MHz, SOIC-8)
SKU: SF-COM-15809 | Brand: SparkFun
The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. This small SMD IC series offers flexibility and performance well beyond ordinary Serial Flash dev...
Delivered by Wed 2 Dec
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython or Arduino - Low Cost Version
SKU: AF-3939 | Brand: Adafruit
The Adafruit PyBadge LC is the low-cost version of the PyBadge — a credit-card-sized development board with a colour TFT display, game-style buttons, and a built-in speaker. It runs MakeCode Arcade games, CircuitPytho...
Delivered by Tue 15 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared