All Products

SKU: AF-4694 | Brand: Adafruit

The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and ...

SKU: SF-ROB-16836 | Brand: SparkFun

The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...

SKU: EC-DTE01011I | Brand: Elecrow

ESP32-WROVER module is based on ESP32 chip, the core chip is ESP32-D0WDQ6. It is a setup of ESP-WROOM-32 with an additional 4MB SPI PSRAM (Pseudo static RAM). In addition, ESP32-WROVER module also has 4 MB external SP...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: EC-ACS53201S | Brand: Elecrow

NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon...

SKU: DF-DFR0664 | Brand: DFRobot

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible ...

SKU: AF-4653 | Brand: Adafruit

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...

SKU: AF-4634 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...

SKU: SF-KIT-15948 | Brand: SparkFun

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an ea...

SKU: DF-DFR0623 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3...

SKU: AF-4502 | Brand: Adafruit

The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±400...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: DF-TEL0125 | Brand: DFRobot

The FireBeetle LoRa Radio 868 MHz is a wireless transmission cover board for the DFRobot FireBeetle series, featuring the Semtech SX1276 LoRa transceiver with a built-in power amplifier. It supports LoRa long-range mo...

SKU: AF-4367 | Brand: Adafruit

The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...

SKU: AF-4363 | Brand: Adafruit

Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...

SKU: AF-4313 | Brand: Adafruit

The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp...

SKU: AF-4285 | Brand: Adafruit

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: AF-4278 | Brand: Adafruit

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare displa...

SKU: AF-4264 | Brand: Adafruit

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...