All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
FLiR Lepton Breakout Board V2
SKU: SF-BOB-16912 | Brand: SparkFun
The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...
Delivered by Fri 3 Jul
SparkFun MicroMod GNSS Function Board - NEO-M9N
SKU: SF-GPS-18378 | Brand: SparkFun
The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...
Delivered by Fri 3 Jul
Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)
SKU: DF-DFR0928 | Brand: DFRobot
A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle ...
Delivered by Fri 3 Jul
SparkFun MicroMod GNSS Function Board - ZED-F9P
SKU: SF-GPS-19663 | Brand: SparkFun
With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...
Delivered by Fri 3 Jul
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic)
SKU: SF-SEN-19764 | Brand: SparkFun
A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...
Delivered by Fri 3 Jul
Luxonis OAK-D-IoT-40
SKU: SF-SEN-18737 | Brand: SparkFun
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis. This sensor can be used completely standalone or via USB with a host like normal USB-only variants of DepthAI. It has a built-in ...
Delivered by Fri 3 Jul
1872×1404, 10.3inch flexible E-Ink display HAT for Raspberry Pi
SKU: WS-16712 | Brand: Waveshare
A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951...
Delivered by Wed 15 Jul
Fermion: I2C H3LIS200DL Triple Axis Accelerometer (Breakout) (±100g/±200g)
SKU: DF-SEN0408 | Brand: DFRobot
The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...
Delivered by Fri 3 Jul
Fermion: DS3232 Precise RTC (Breakout)
SKU: DF-DFR0821 | Brand: DFRobot
A high-precision real-time clock (RTC) breakout board based on the DS3232 chip, featuring an integrated crystal resonator and temperature compensator. The DS3232 maintains accuracy of ±3.5ppm (±0.3 seconds/day) across...
Delivered by Fri 3 Jul
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: DF-SEN0443 | Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...
Delivered by Fri 3 Jul
Fermion: BMP390L Digital Barometric Pressure Sensor (Breakout)
SKU: DF-SEN0423 | Brand: DFRobot
A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...
Delivered by Fri 3 Jul
4.7" E-ink Screen for ESP32
SKU: DF-DFR0835 | Brand: DFRobot
This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 graysc...
Delivered by Fri 3 Jul
TinyPICO ESP32 Development Board with USB-C
SKU: AF-5028 | Brand: Adafruit
TinyPICO is the world's smallest fully-featured ESP32 development board, packing dual-core 240MHz processing, Wi-Fi, Bluetooth, and 4MB of PSRAM into a package smaller than your thumb. This is the V2 USB-C edition wit...
Delivered by Tue 14 Jul
Monochrome 1.3" 128x64 SH1106G SPI OLED Monochrome Display
SKU: AF-5228 | Brand: Adafruit
A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED ...
Delivered by Tue 14 Jul
ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM
SKU: AF-4760 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...
Delivered by Tue 14 Jul
Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU
SKU: AF-4464 | Brand: Adafruit
The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...
Delivered by Wed 24 Jun
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Delivered by Tue 14 Jul
Adafruit Feather nRF52 Pro with myNewt Bootloader
SKU: AF-3574 | Brand: Adafruit
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...
Delivered by Tue 14 Jul
ESP32-S2 WROOM Module - 4MB (PCB Antenna)
SKU: SF-WRL-18583 | Brand: SparkFun
It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WROOM Module with new and improved features such as security, display su...
Delivered by Fri 3 Jul
Pico:ed - Development board based on Raspberry Pi RP2040
SKU: EF-EF01033 | Brand: ElecFreaks
The Pico:ed is a development board built around the Raspberry Pi RP2040 microcontroller, featuring a 7×17 LED dot-matrix display and two programmable buttons on the front — making it perfect for interactive classroom ...
Delivered by Wed 24 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
