All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun micro:climate kit for micro:bit - v3.0
SKU: SF-KIT-16274 | Brand: SparkFun
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we've carried, this micro:climate kit is Qwiic enabled and includes o...
Delivered by Wed 5 Aug
Gravity: Digital 1-to-8 I2C Multiplexer
SKU: DF-DFR0576 | Brand: DFRobot
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight ident...
Delivered by Wed 5 Aug
FireBeetle 2 ESP32-C6 IoT Development Board for Smart Home Control System
SKU: DF-DFR1075 | Brand: DFRobot
The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standar...
Delivered by Fri 14 Aug
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
SKU: AF-5743 | Brand: Adafruit
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of you...
Delivered by Wed 5 Aug
Raspberry Pi Pico Entry-Level Sensor Kit Board
SKU: WS-24004 | Brand: Waveshare
Raspberry Pi Pico Entry-Level Sensor Kit Including 15 Common Modules Such As LED, Button, Buzzer, Etc.Out Of The Box As A Whole Kit, Or Can Be Separated To Use Independently Comes With Online Development Resources And...
Delivered by Wed 5 Aug
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
SKU: DF-DFR0896 | Brand: DFRobot
The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...
Delivered by Wed 5 Aug
Gravity: 360 Degree Rotary Encoder Module
SKU: DF-SEN0502 | Brand: DFRobot
This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...
Delivered by Wed 5 Aug
ESP32-C3-DevKitM-1 Development Board
SKU: DF-DFR0807 | Brand: DFRobot
ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the ESP32-C3...
Delivered by Fri 14 Aug
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
SKU: AF-4716 | Brand: Adafruit
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...
Delivered by Wed 5 Aug
Adafruit BMP388 - Precision Barometric Pressure and Altimeter
SKU: AF-3966 | Brand: Adafruit
The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...
Delivered by Wed 5 Aug
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
SKU: DF-DFR0464 | Brand: DFRobot
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compa...
Delivered by Wed 5 Aug
MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor
SKU: AF-1893 | Brand: Adafruit
The MPL3115A2 is a precision barometric pressure, altitude, and temperature sensor from NXP (formerly Freescale) that communicates over I2C. With 1.5 Pa resolution, it can resolve altitude changes as small as 0.3 m an...
Delivered by Thu 27 Aug
ESP32-S3 Round AMOLED Touch Display Board - 466x466, Dual-Core, Dual Mic, QSPI
SKU: WS-31261 | Brand: Waveshare
Unleash your creativity with the cutting-edge ESP32-S3 1.75inch AMOLED Round Touch Display Development Board! This state-of-the-art board is the perfect tool for developers and hobbyists looking to bring their innovat...
Delivered by Thu 27 Aug
3.5" Capacitive Touch IPS Display – 320x480, ST7796S & FT6336U
SKU: WS-29318 | Brand: Waveshare
A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simpl...
Delivered by Thu 27 Aug
Adafruit PiCowbell Proto for Pico - Reset Button & STEMMA QT
SKU: AF-5200 | Brand: Adafruit
The Adafruit PiCowbell Proto is a prototyping add-on board for the Raspberry Pi Pico and Pico W. It matches the Pico's footprint and sockets underneath, giving you a reset button, a STEMMA QT / Qwiic I2C connector, an...
Delivered by Thu 27 Aug
Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
SKU: DF-DFR0972 | Brand: DFRobot
The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit r...
Delivered by Fri 14 Aug
Adafruit Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver
SKU: AF-5650 | Brand: Adafruit
The Feather RP2040 SCORPIO is designed specifically for driving large quantities of NeoPixels (WS2812) using the RP2040's PIO state machines. It features 8 consecutive GPIO outputs with a 3V-to-5V level shifter, allow...
Delivered by Thu 27 Aug
SparkFun IoT RedBoard - ESP32 Development Board
SKU: SF-WRL-19177 | Brand: SparkFun
The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of application...
Delivered by Wed 5 Aug
Gravity: MAX30102 Heart Rate and Oximeter Sensor
SKU: DF-SEN0518 | Brand: DFRobot
The DFRobot Gravity MAX30102 sensor module measures heart rate and blood oxygen saturation (SpO2) using photoplethysmography (PPG). It integrates the Maxim MAX30102 chip with an on-board MCU that processes raw PPG dat...
Delivered by Fri 14 Aug
SHT31 Weather-proof Temperature Humidity Sensor
SKU: DF-SEN0385 | Brand: DFRobot
This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects. Please note that although the sensor is waterpr...
Delivered by Fri 14 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared