All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card
SKU: AF-5980 | Brand: Adafruit
The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in...
Delivered by Tue 15 Dec
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
SKU: AF-5976 | Brand: Adafruit
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...
Delivered by Mon 23 Nov
Adafruit TRRS Trinkey - USB Key for Assistive Technology
SKU: AF-5954 | Brand: Adafruit
The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ri...
Delivered by Tue 15 Dec
Adafruit PiCowbell Camera Breakout - 120 Degree Low Distortion
SKU: AF-5948 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout adds a 5-megapixel camera with a 120-degree low-distortion wide-angle lens to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's bui...
Delivered by Tue 15 Dec
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: AF-5937 | Brand: Adafruit
The Adafruit BNO055 + BMP280 BFF is a compact add-on board that gives any QT Py or Xiao board powerful 9-degree-of-freedom (9-DoF) motion sensing plus barometric pressure and altitude measurement. It mounts directly o...
Delivered by Tue 15 Dec
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Tue 15 Dec
Adafruit Proto Under Plate PiCowBell for Pico
SKU: AF-5905 | Brand: Adafruit
The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket head...
Delivered by Tue 15 Dec
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi
SKU: SF-GPS-21305 | Brand: SparkFun
The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated...
Delivered by Wed 2 Dec
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Mon 23 Nov
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
SKU: SF-WRL-24806 | Brand: SparkFun
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V c...
Delivered by Wed 2 Dec
SparkFun Experiential Robotics Platform (XRP) Controller
SKU: SF-ROB-22727 | Brand: SparkFun
The SparkFun XRP Controller is the brain of the Experiential Robotics Platform (XRP), a hands-on educational robotics system designed for middle and high school students. Built around a Raspberry Pi Pico W, it provide...
Delivered by Wed 2 Dec
SparkFun ESLOV to Qwiic Bridge
SKU: SF-BOB-23589 | Brand: SparkFun
The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without...
Delivered by Wed 2 Dec
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
SKU: SF-SEN-22638 | Brand: SparkFun
The SparkFun Tristimulus Color Sensor is built around the Texas Instruments OPT4048DTSR — a high-speed, high-precision four-channel colour sensor. Three channels closely match the CIE 1931 tristimulus XYZ spectra with...
Delivered by Wed 2 Dec
ESP32-C3-DevKit-RUST-1 - 4 MB Flash
SKU: AF-5787 | Brand: Adafruit
ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet...
Delivered by Tue 15 Dec
Flexible Qwiic Cable - Female Jumper (4-pin, Heat Shrink)
SKU: SF-CAB-22726 | Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the ma...
Delivered by Wed 2 Dec
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
SKU: SF-GPS-22660 | Brand: SparkFun
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....
Delivered by Wed 2 Dec
Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
SKU: AF-5753 | Brand: Adafruit
Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw ...
Delivered by Tue 15 Dec
Arduino Portenta C33
SKU: SF-DEV-22692 | Brand: SparkFun
The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with o...
Delivered by Wed 2 Dec
SparkFun CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic)
SKU: SF-SEN-22395 | Brand: SparkFun
The SparkFun SCD40 breakout board measures CO₂ concentration, humidity, and temperature using Sensirion's PASens photoacoustic measurement technology. The sensor detects CO₂ from 0 to 40,000 ppm with high accuracy ove...
Delivered by Wed 2 Dec
Gravity: GR10-30 Gesture Sensor (UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0561 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward, backward, rotate clockwise and counterclockwise, rotate clockwise and counterclockwise continuously, hover, ...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared