All Products

SKU: AF-5744 | Brand: Adafruit

The Tiny Code Reader from Useful Sensors is a small, low-cost hardware module that reads QR codes. It's designed to be a simple way to provision a system, for example, by providing the Wi-Fi network name and password ...

SKU: SF-SEN-21325 | Brand: SparkFun

Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X, from STMicroelectronics, is a high-performance,...

SKU: AF-5727 | Brand: Adafruit

The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...

SKU: AF-5736 | Brand: Adafruit

A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life!  Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, pro...

SKU: AF-5651 | Brand: Adafruit

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song na...

SKU: SF-DEV-20690 | Brand: SparkFun

The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. g...

SKU: SF-SEN-19895 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedo...

SKU: SF-BOB-16281 | Brand: SparkFun

The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of se...

SKU: SF-ROB-16328 | Brand: SparkFun

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins ...

SKU: SF-BOB-14558 | Brand: SparkFun

Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running at only about 22nA in its lowest power settin...

SKU: SF-DEV-15164 | Brand: SparkFun

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: SF-GPS-28929 | Brand: SparkFun

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG...

SKU: SF-CAB-28768 | Brand: SparkFun

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravit...

SKU: SF-PRT-28203 | Brand: SparkFun

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH...

SKU: SF-LCD-29467 | Brand: SparkFun

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics ...

SKU: AF-6258 | Brand: Adafruit

The Adafruit DAC6578 Breakout provides eight independent 10-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making...

SKU: AF-6349 | Brand: Adafruit

The Adafruit INA238 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: AF-6340 | Brand: Adafruit

The Adafruit INA237 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: AF-6331 | Brand: Adafruit

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...