All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit Grove and Stemma QT FeatherWing for all Feathers
SKU: AF-5862 | Brand: Adafruit
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical...
Delivered by Tue 15 Dec
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Wed 2 Dec
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Tue 15 Dec
Adafruit PCF8575 I2C 16 GPIO Expander Breakout
SKU: AF-5611 | Brand: Adafruit
The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...
Delivered by Tue 15 Dec
Plasma 2040
SKU: PR-PIM582 | Brand: Little Bird
Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also...
Delivered by Mon 23 Nov
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Tue 15 Dec
Adafruit Wii Nunchuck Breakout Adapter - Qwiic / STEMMA QT
SKU: AF-4836 | Brand: Adafruit
Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you ...
Delivered by Tue 15 Dec
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Mon 23 Nov
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
SKU: SF-BOB-16784 | Brand: SparkFun
The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...
Delivered by Wed 2 Dec
Adafruit ATECC608 Breakout Board - STEMMA QT / Qwiic
SKU: AF-4314 | Brand: Adafruit
The Adafruit ATECC608 Breakout provides hardware-based cryptographic security for your microcontroller projects. This crypto-authentication chip from Microchip stores private keys securely — once locked, the keys cann...
Delivered by Tue 15 Dec
SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)
SKU: SF-DEV-15334 | Brand: SparkFun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channe...
Delivered by Wed 2 Dec
Arduino UNO Q - 2GB
SKU: LB-ABX00162 | Brand: Little Bird
Meet Arduino UNO Q — a dual-processor development board that combines a Debian-based Linux computer with a real-time microcontroller. Build robots, edge-AI systems, and connected IoT devices on a single platform where...
Delivered by Mon 23 Nov
SparkFun Ambient Light Sensor - VEML7700 (Qwiic) - SparkFun Electronics
SKU: SF-SEN-29211 | Brand: SparkFun
The SparkFun VEML7700 Qwiic Ambient Light Sensor provides accurate 16-bit light readings from 0 to 167,000 lux via I2C. The sensor features Vishay's Filtron™ technology for human-eye-like response and ultra-low power ...
Delivered by Wed 2 Dec
Mini Sparkle Motion with Pre-soldered Terminal Block
SKU: AF-6314 | Brand: Adafruit
The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...
Delivered by Tue 15 Dec
Flexible Qwiic to STEMMA Cable - 500mm
SKU: SF-CAB-25596 | Brand: SparkFun
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Ada...
Delivered by Mon 23 Nov
Adafruit PiCowBell Camera Breakout - Wide Angle 160 Degree Lens
SKU: AF-5947 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with 160° Wide-Angle Lens adds a 5-megapixel camera with an ultra-wide 160-degree field of view to your Raspberry Pi Pico or Pico W. The widest lens option in the PiCowbel...
Delivered by Tue 15 Dec
Adafruit Proto Doubler PiCowbell for Pico and PicoW
SKU: AF-5906 | Brand: Adafruit
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...
Delivered by Tue 15 Dec
SparkFun Thing Plus - ESP32-C6
SKU: SF-DEV-22924 | Brand: SparkFun
The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 modul...
Delivered by Wed 2 Dec
Inventor HAT Mini
SKU: PR-PIM672 | Brand: Little Bird
Introducing the Inventor HAT Mini, a versatile motor, servo, and audio driver add-on board designed for Raspberry Pi enthusiasts. With this compact HAT, you can bring your mechanical inventions, creations, and cont...
Delivered by Mon 23 Nov
SparkFun Qwiic Pocket Development Board - ESP32-C6
SKU: SF-DEV-22925 | Brand: SparkFun
The SparkFun ESP32-C6 Qwiic Pocket Development Board is designed to fit the 1in. x 1in. Qwiic Standard Size, making it easy to add a powerful wireless development platform that stacks into any existing project using t...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared