All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
OnOff SHIM
SKU: PR-PIM269 | Brand: Little Bird
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare ...
Delivered by Fri 12 Jun
ESP32-S3 Dual-Core Dev Board with 1.28" Round IPS Display
SKU: WS-26541 | Brand: Waveshare
Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Wavesh...
Delivered by Fri 12 Jun
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM And 16MB Onboard Flash Memory
SKU: WS-25506 | Brand: Waveshare
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Bo...
Delivered by Fri 12 Jun
Beetle ESP32 - C3 (RISC-V Core Development Board)
SKU: DF-DFR0868 | Brand: DFRobot
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery chargin...
Delivered by Fri 12 Jun
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Fri 12 Jun
Kitronik Inventor's Kit for the BBC micro:bit
SKU: KI-5603 | Brand: Kitronik
The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiom...
Delivered by Fri 12 Jun
Pico HAT Hacker
SKU: PR-PIM300 | Brand: Little Bird
The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...
Delivered by Fri 12 Jun
Raspberry Pi Zero WH (Zero W with Headers) - v1.3
SKU: AF-3708 | Brand: Adafruit
If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero WH offers all the benefits of the Pi Zero W, b...
Delivered by Fri 12 Jun
Reed Switch
SKU: SF-COM-08642 | Brand: SparkFun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...
Delivered by Fri 12 Jun
Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B / 3B+)
SKU: DF-DFR0876 | Brand: DFRobot
The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...
Delivered by Fri 12 Jun
Adafruit Feather RP2040 with RFM95 LoRa Radio - 915MHz
SKU: AF-5714 | Brand: Adafruit
The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software...
Delivered by Fri 12 Jun
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Fri 12 Jun
Edge Connector Breakout Board for BBC micro:bit - Pre-built
SKU: KI-5601B | Brand: Kitronik
The Edge Connector Breakout Board for the BBC micro:bit provides easy access to all of the processor pins on the micro:bit's edge connector. Pre-built with pin headers already soldered, it's ready to use straight out ...
Delivered by Fri 12 Jun
SparkFun RJ45 Breakout
SKU: SF-BOB-00716 | Brand: SparkFun
RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an...
Delivered by Fri 12 Jun
WiFi Module - ESP8266 (4MB Flash)
SKU: SF-WRL-17146 | Brand: SparkFun
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloa...
Delivered by Fri 12 Jun
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
SKU: DF-DFR0626 | Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...
Delivered by Fri 12 Jun
Picade X HAT USB-C
SKU: PI-PIM462 | Brand: Pimoroni
The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your ...
Delivered by Fri 12 Jun
Micro:bit Breakout Board ( Octopus:bit)
SKU: EF-EF03405 | Brand: ElecFreaks
The Octopus:bit is a breakout board for the BBC micro:bit that extends all GPIO ports (P0–P16, P19–P20) into colour-coded pin headers with VCC and GND alongside each I/O pin. This makes connecting sensors, servos, and...
Delivered by Fri 12 Jun
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
SKU: EC-DIS01835A-3 | Brand: Elecrow
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction v...
Delivered by Fri 12 Jun
GPIO Expansion Board for Raspberry Pico
SKU: LB-LS3513 | Brand: Little Bird
Expand your Raspberry Pico projects with the GPIO Expansion Board from YWRobot! This essential accessory empowers makers, educators, and hobbyists to effortlessly expand their GPIO capabilities, opening up a world of ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
