All Products

SKU: AF-3654 | Brand: Adafruit

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...

SKU: AF-1046 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded yellow-orange LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the si...

SKU: AF-1079 | Brand: Adafruit

This miniature 8×8 LED matrix packs 64 bright white LEDs into a compact 0.8″ (20 mm) square package. The 16 pins (8 per side) are on standard 0.1″ spacing, so the module plugs directly into a breadboard with room to s...

SKU: AF-1096 | Brand: Adafruit

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on our mat...

SKU: AF-1312 | Brand: Adafruit

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on e...

SKU: AF-3213 | Brand: Adafruit

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit ...

SKU: AF-3635 | Brand: Adafruit

A mid-density side-emitting NeoPixel strip with 90 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degrees ...

SKU: AF-1762 | Brand: Adafruit

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring need...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: AF-1849 | Brand: Adafruit

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and ever...

SKU: AF-2133 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: AF-2278 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays vie...

SKU: AF-2478 | Brand: Adafruit

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buff...

SKU: AF-2711 | Brand: Adafruit

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderl...

SKU: AF-2746 | Brand: Adafruit

The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with i...

SKU: AF-2771 | Brand: Adafruit

The Feather 32u4 Basic Proto is the no-frills member of the Feather 32u4 family, with a built-in prototyping area where you can solder on extra components like buttons, sensors, or connectors without needing a separat...

SKU: AF-2995 | Brand: Adafruit

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provide...

SKU: AF-3000 | Brand: Adafruit

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sew...