All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity:Analog UV Sensor V2
SKU: DF-SEN0162 | Brand: DFRobot
The Gravity Analog UV Sensor V2 uses a GUVA-S12SD photodiode to detect ultraviolet radiation in the 200–370 nm (UV-A) wavelength range. It outputs a linear analogue voltage signal proportional to UV intensity, making ...
Delivered by Wed 14 Oct
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Mon 5 Oct
Panel Temperature Meter / -30 to +70 °C
SKU: AF-576 | Brand: Adafruit
Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...
Delivered by Tue 27 Oct
1/4 (6.35mm) DIY Stereo In-Line Jack
SKU: AF-1804 | Brand: Adafruit
A durable 1/4" (6.35 mm) stereo in-line jack for building or repairing your own audio cables. The all-metal construction and flexible spring strain relief ensure a long-lasting, reliable connection. Simply solder you...
Delivered by Mon 5 Oct
SparkFun Sound Detector
SKU: SF-SEN-12642 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...
Delivered by Wed 14 Oct
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Mon 5 Oct
Panel Mount 10K Log Potentiometer (Breadboard Friendly) [10K Log]
SKU: AF-3391 | Brand: Adafruit
This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own...
Delivered by Tue 27 Oct
WT8266-S1 WiFi Module Based on ESP8266
SKU: DF-TEL0109 | Brand: DFRobot
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building aut...
Delivered by Mon 5 Oct
Force Sensitive Resistor - Long
SKU: SF-SEN-09674 | Brand: SparkFun
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area....
Delivered by Wed 14 Oct
Gravity: Heart Rate Monitor Sensor For Arduino
SKU: DF-SEN0203 | Brand: DFRobot
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor which is developed based on PPG (PhotoPlethysmoGraphy) techniques. This ...
Delivered by Wed 14 Oct
IR Reflectance Sensor - QRE1113
SKU: SF-COM-09542 | Brand: SparkFun
The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...
Delivered by Wed 14 Oct
Thumb Slide Joystick
SKU: SF-COM-09426 | Brand: SparkFun
A compact resistive analog joystick similar to those found on the PSP1000. Unlike traditional thumbstick joysticks, this one has a distinctive flat "slide" feel with a removable rubber thumb pad. Connect to an Arduin...
Delivered by Wed 14 Oct
Panel Mount 10K Dual Log Potentiometer w/ On-Off Switch [10K Dual Log w Switch]
SKU: AF-3482 | Brand: Adafruit
This Panel Mount 10K Dual Logarithmic Potentiometer w/ On-Off Switch is a two-in-one; you get a dual-ganged potentiometer and an on-off switch. For the potentiometer-half, you've got a dual standard log-t...
Delivered by Tue 27 Oct
Touch screen (Nintendo DSL digitizer)
SKU: AF-333 | Brand: Adafruit
A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins...
Delivered by Tue 27 Oct
Python Starter Kit for UNIHIKER M10 (Learn AI & IoT with 15 Lessons)
SKU: DF-KIT0194 | Brand: DFRobot
This expansion ecosystem transforms the UNIHIKER M10 single-board computer into a fully functional AIoT development station. By leveraging the modular DFRobot Gravity interface, the kit allows for the seamless integr...
Delivered by Mon 5 Oct
JST SH Compatible 1mm Pitch 3-pin Plug-Plug Cable
SKU: AF-6405 | Brand: Adafruit
This JST SH compatible cable features 1 mm pitch 3-pin connectors on both ends, making it ideal for chaining boards together or connecting to debug ports. It's perfect for use with NeoPixel JST breakout boards, UPDI p...
Delivered by Tue 27 Oct
JST SH Compatible 1mm Pitch 3-pin Plug-Plug Cable
SKU: AF-6404 | Brand: Adafruit
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...
Delivered by Tue 27 Oct
JST SH Compatible 1mm Pitch 3-pin - Plug-Plug Cable
SKU: AF-6406 | Brand: Adafruit
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...
Delivered by Tue 27 Oct
Kitronik Compact Motor Driver Board for the BBC micro:bit
SKU: KI-5698 | Brand: Kitronik
A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, ov...
Delivered by Mon 5 Oct
Romeo ESP32-C3 Robot Control Board (Supports Wi-Fi; Bluetooth 5)
SKU: DF-DFR1063 | Brand: DFRobot
The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gr...
Delivered by Wed 14 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared