All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
2 x 45mm 4ohm 4Ω 3W Stereo Speaker with PH2.0 Plug
SKU: LB-LS6972x2 | Brand: Little Bird
A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plu...
Delivered by Fri 12 Jun
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
SKU: AF-6251 | Brand: Adafruit
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...
Delivered by Thu 2 Jul
SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1
SKU: SF-BOB-19389 | Brand: SparkFun
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. This board features an OpAmp to bring the output of the microphone to a usable level, allowing ...
Delivered by Fri 12 Jun
ESP32-S2-WROOM WiFi Module Based on ESP32-S2 Chip with PCB Antenna
SKU: EC-DPI32110W | Brand: Elecrow
ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the...
Delivered by Fri 26 Jun
EasyESP-1: An ESP8266 experimenter board for beginners
SKU: EC-CDE82664E | Brand: Elecrow
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly ...
Delivered by Fri 12 Jun
Adafruit Feather nRF52840 Sense
SKU: AF-4516 | Brand: Adafruit
The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plu...
Delivered by Thu 2 Jul
Adafruit HUZZAH32 – ESP32 Breakout Board
SKU: AF-4172 | Brand: Adafruit
The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a gener...
Delivered by Fri 12 Jun
Gravity: Analog EMG Sensor by OYMotion
SKU: DF-SEN0240 | Brand: DFRobot
The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...
Delivered by Tue 23 Jun
Mini Photocell
SKU: DF-FIT0180 | Brand: DFRobot
This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. Thes...
Delivered by Tue 23 Jun
SparkFun Ambient Light Sensor Breakout - TEMT6000
SKU: SF-BOB-08688 | Brand: SparkFun
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Docu...
Delivered by Fri 12 Jun
Flex Sensor 4.5
SKU: SF-SEN-08606 | Brand: SparkFun
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...
Delivered by Fri 12 Jun
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
SKU: SF-BOB-13906 | Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...
Delivered by Fri 12 Jun
SparkFun Load Sensor Combinator
SKU: SF-BOB-13878 | Brand: SparkFun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s ne...
Delivered by Fri 12 Jun
16 Channel Multiplexer
SKU: SF-COM-00299 | Brand: SparkFun
The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus ...
Delivered by Fri 12 Jun
Thermocouple Type-K - Stainless Steel
SKU: SF-SEN-13715 | Brand: SparkFun
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the othe...
Delivered by Tue 23 Jun
Round Force-Sensitive Resistor (FSR) [Interlink 402]
SKU: AF-166 | Brand: Adafruit
The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, lo...
Delivered by Fri 12 Jun
Anemometer Kit (0-5V)
SKU: DF-SEN0170 | Brand: DFRobot
A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion r...
Delivered by Fri 12 Jun
SparkFun ESP8266 Thing
SKU: SF-WRL-13231 | Brand: SparkFun
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...
Delivered by Fri 12 Jun
Adafruit STEMMA Reflective Photo Interrupt Sensor - TCRT1000
SKU: AF-5913 | Brand: Adafruit
The Adafruit STEMMA Reflective Photo Interrupt Sensor uses a TCRT1000 right-angle optical module to detect reflective surfaces. An onboard IR LED emits light, and when an object reflects it back to the IR phototransis...
Delivered by Thu 2 Jul
Kitronik Air Quality Datalogging Board for Pico
SKU: KI-5336 | Brand: Kitronik
The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
