All Products

SKU: DF-SEN0331 | Brand: DFRobot

This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap ...

SKU: AF-4646 | Brand: Adafruit

The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...

SKU: LB-TINY | Brand: Little Bird

The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...

SKU: EF-EF04093 | Brand: ElecFreaks

Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...

SKU: AF-3886 | Brand: Adafruit

The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...

SKU: LB-LS1673 | Brand: Little Bird

This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they a...

SKU: EF-EF04027 | Brand: ElecFreaks

Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...

SKU: AF-3966 | Brand: Adafruit

The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...

SKU: DF-DFR0464 | Brand: DFRobot

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compa...

SKU: AF-3648 | Brand: Adafruit

The Adafruit PT1000 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter, configured for PT1000 platinum resistance temperature detectors. It reads 2-, 3-, or 4-wire...

SKU: AF-3686 | Brand: Adafruit

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have ho...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: AF-2717 | Brand: Adafruit

The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels...

SKU: DF-SEN0129 | Brand: DFRobot

INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...

SKU: DF-SEN0127 | Brand: DFRobot

  INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in c...

SKU: AF-1893 | Brand: Adafruit

The MPL3115A2 is a precision barometric pressure, altitude, and temperature sensor from NXP (formerly Freescale) that communicates over I2C. With 1.5 Pa resolution, it can resolve altitude changes as small as 0.3 m an...

SKU: DF-SEN0017 | Brand: DFRobot

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sens...

SKU: SF-ROB-09453 | Brand: SparkFun

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: DF-DFR1154 | Brand: DFRobot

An intelligent AI camera module built around the ESP32-S3 chip, combining a 160° wide-angle infrared camera, onboard microphone, speaker, and powerful edge AI capabilities. Designed for video processing, image recogni...