All Products

SKU: PI-COM1701 | Brand: Pimoroni

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide t...

SKU: TR-GIZLIGHT | Brand: 4tronix

The Playground system is an easy way to connect from Crumble, Raspberry Pi or BBC micro:bit to useful GizmosThe Light Sensor Gizmo provides an easy way to connect an Analog input which varies with the brightness of th...

SKU: PR-PIM062 | Brand: Little Bird

The big brother to the Skywriter HAT -  Skywriter adds 3D gesture sensing to your project! Using our Python and Arduino libraries you can read off the positional data (x, y, z) and common gestures like ...

SKU: SF-SEN-14844 | Brand: SparkFun

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...

SKU: PI-PYC007 | Brand: Pimoroni

The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiP...

SKU: PI-PYC006 | Brand: Pimoroni

The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger...

SKU: PI-AT-04-001 | Brand: Pimoroni

The MyoWare Muscle Sensor is an all-in-one electromyography (EMG) sensor that measures the filtered and rectified electrical activity of a muscle. It outputs 0 V to Vs (supply voltage) depending on the level of activi...

SKU: PI-ESP004 | Brand: Pimoroni

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...

SKU: AF-4098 | Brand: Adafruit

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.7" breakout board. The panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power com...

SKU: AF-4078 | Brand: Adafruit

The MDBT50Q-1M is a compact Bluetooth Low Energy module based on the Nordic nRF52840 Cortex-M4 processor. It integrates the BLE radio, native USB support, and a chip antenna into a small, pre-certified package — ready...

SKU: SF-SEN-15050 | Brand: SparkFun

The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...

SKU: AF-1558 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Breadboard-Friendly NeoPixel breakouts fresh from the (reflow) oven. Snap them off as you need 'em and save a pr...

SKU: SF-SEN-14480 | Brand: SparkFun

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for ...

SKU: AF-1778 | Brand: Adafruit

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the tem...

SKU: SF-SEN-14049 | Brand: SparkFun

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the devi...

SKU: SF-SEN-12041 | Brand: SparkFun

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use d...

SKU: SF-SEN-11862 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...

SKU: SF-WRL-13804 | Brand: SparkFun

This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-en...

SKU: SF-WRL-13711 | Brand: SparkFun

This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-e...

SKU: SF-SEN-13261 | Brand: SparkFun

The SparkFun OpenScale is an open-source weight measurement board designed for load cells. Simply connect a four-wire or five-wire load cell of any capacity, plug into USB, open a serial terminal at 9,600 bps, and you...