All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Delivered by Wed 14 Oct
ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32
SKU: AF-3320 | Brand: Adafruit
The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to dema...
Delivered by Mon 5 Oct
Gravity: Digital Hall Sensor
SKU: DF-SEN0185 | Brand: DFRobot
INTRODUCTION what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right! This Hall sensor knows whether there is a magne...
Delivered by Wed 14 Oct
SparkFun Pressure Sensor Breakout - MS5803-14BA
SKU: SF-SEN-12909 | Brand: SparkFun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...
Delivered by Wed 14 Oct
SparkFun Electric Imp Breakout
SKU: SF-BOB-12886 | Brand: SparkFun
If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breako...
Delivered by Mon 5 Oct
SparkFun RGB Light Sensor - ISL29125
SKU: SF-SEN-12829 | Brand: SparkFun
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 br...
Delivered by Wed 14 Oct
SparkFun ToF Range Finder Breakout - VL6180
SKU: SF-SEN-12784 | Brand: SparkFun
This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...
Delivered by Mon 5 Oct
Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
SKU: AF-613 | Brand: Adafruit
Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC...
Delivered by Tue 27 Oct
Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F
SKU: SF-SEN-12728 | Brand: SparkFun
Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...
Delivered by Mon 5 Oct
Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte
SKU: AF-1895 | Brand: Adafruit
The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEP...
Delivered by Tue 27 Oct
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board
SKU: AF-1899 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Tue 27 Oct
SparkFun RedBot Sensor - Accelerometer
SKU: SF-SEN-12589 | Brand: SparkFun
The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...
Delivered by Wed 14 Oct
XBee WiFi Module - RP-SMA Connector
SKU: SF-WRL-12569 | Brand: SparkFun
This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device network...
Delivered by Mon 5 Oct
ALS-PT19 Light Sensor
SKU: SF-SEN-12566 | Brand: SparkFun
The ALS-PT19 is a compact SMD ambient light sensor, significantly smaller than standard through-hole alternatives like the TEMT6000. Functioning as an NPN phototransistor, it provides an analogue voltage output propor...
Delivered by Wed 14 Oct
Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822 [v3.0]
SKU: AF-2267 | Brand: Adafruit
The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it w...
Delivered by Tue 27 Oct
Adafruit Triple-Axis Accelerometer - ±2/4/8g @ 14-bit - MMA8451
SKU: AF-2019 | Brand: Adafruit
The Adafruit MMA8451 is a high-precision triple-axis accelerometer with a built-in 14-bit ADC, offering selectable measurement ranges of ±2g, ±4g, and ±8g. Designed by Freescale (now NXP), this sensor detects motion, ...
Delivered by Tue 27 Oct
3D Gesture Sensor (Mini) For Arduino
SKU: DF-SEN0202 | Brand: DFRobot
The DFRobot 3D Gesture Sensor (Mini) integrates 3D gesture recognition and motion tracking using Microchip's patented GestIC near-field sensing technology. It can detect clockwise and counterclockwise rotation, direct...
Delivered by Wed 14 Oct
Gravity: 360 Degree Hall Angle Sensor
SKU: DF-SEN0221 | Brand: DFRobot
The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The ...
Delivered by Wed 14 Oct
Gravity: 80cm Arduino Infrared Proximity Sensor
SKU: DF-SEN0019 | Brand: DFRobot
This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...
Delivered by Wed 14 Oct
Gravity: Digital Vibration Sensor
SKU: DF-DFR0027 | Brand: DFRobot
What's the simplest way to check vibration with Arduino? Use a vibration sensor from DFRobot. You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal. It'...
Delivered by Wed 14 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared