All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
SKU: DF-TEL0111 | Brand: DFRobot
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...
Delivered by Wed 2 Dec
IR Reflectance Sensor - QRE1113
SKU: SF-COM-09542 | Brand: SparkFun
The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...
Delivered by Wed 2 Dec
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Mon 23 Nov
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Mon 23 Nov
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
SKU: AF-5606 | Brand: Adafruit
The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single c...
Delivered by Tue 15 Dec
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Mon 23 Nov
8*8 dot matrix module
SKU: LB-LR0122 | Brand: Little Bird
This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...
Delivered by Mon 23 Nov
RP2350 6-Channel Industrial Relay Module – RS485/Pico HAT, Rail-Mount, Isolation Protection
SKU: WS-31790 | Brand: Waveshare
Industrial 6-Channel RP2350 Relay Module with Onboard RS485 / Pico HAT InterfacesElevate your industrial automation with the robust Industrial 6-Channel RP2350 Relay Module, a versatile and resilient solution for mana...
Delivered by Tue 15 Dec
IR Thermal Imaging Camera Module – 80x62, Motion Detection, SPI/I2C, Raspberry Pi Compatible, 44° FOV
SKU: WS-31940 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Tue 15 Dec
Gravity: LTC4316 I2C Address Shifter - I2C Conflict Resolver for Arduino & Raspberry Pi
SKU: DF-DFR1193 | Brand: DFRobot
The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...
Delivered by Wed 2 Dec
50m TOF Laser Ranging Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0648 | Brand: DFRobot
The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...
Delivered by Wed 2 Dec
Adafruit SPA06-003 Temperature + Pressure Sensor
SKU: AF-6420 | Brand: Adafruit
The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...
Delivered by Tue 15 Dec
Adafruit STHS34PF80 IR Presence / Motion Sensor
SKU: AF-6426 | Brand: Adafruit
The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...
Delivered by Tue 15 Dec
RockBLOCK 9704 - Patch Antenna - SparkFun Electronics
SKU: SF-WRL-28896 | Brand: SparkFun
The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a built-in patch antenna and a supercap charger to enable low power operation. If you need low data rate connectiv...
Delivered by Wed 2 Dec
SparkPNT GNSS Flex Module - mosaic-X5 - SparkFun Electronics
SKU: SF-GPS-28138 | Brand: SparkFun
The SparkPNT GNSS Flex Module features the Septentrio mosaic-X5, an industrial-grade multi-band, multi-constellation GNSS receiver capable of centimetre-level RTK positioning accuracy. Designed for demanding applicati...
Delivered by Wed 2 Dec
Ultrasonic Distance Sensor - 3.3V (HC-SR04), 180° (red) - SparkFun Electronics
SKU: SF-SEN-28798 | Brand: SparkFun
This is the HC-SR04 ultrasonic distance sensor, now in Red! This economical sensor offers non-contact measurement functionality ranging from 2cm to 400cm, with a ranging accuracy of up to 3mm. Each HC-SR04 ...
Delivered by Wed 2 Dec
SparkFun Qwiic 5V Boost - AP3012K - SparkFun Electronics
SKU: SF-PRT-28203 | Brand: SparkFun
The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH...
Delivered by Wed 2 Dec
SparkFun Audio Player Breakout - MY1690X-16S - SparkFun Electronics
SKU: SF-BOB-28038 | Brand: SparkFun
A compact serial-controlled audio player breakout built around the MY1690X-16S decoder. Simply load MP3 or WAV files onto a microSD card, connect to your microcontroller via serial, and play audio with simple commands...
Delivered by Wed 2 Dec
SparkFun Roller Encoder Breakout - SparkFun Electronics
SKU: SF-BOB-29094 | Brand: SparkFun
A breakout board for the Panasonic EVQWGD001 roller wheel encoder with press-to-select switch. This tactile input device combines a scrolling wheel with a push button in a compact form factor – similar to the scroll w...
Delivered by Wed 2 Dec
SparkFun RGB LED Breakout - WS2812B (with Headers) - SparkFun Electronics
SKU: SF-BOB-29762 | Brand: SparkFun
The WS2812 (often referred to as a "NeoPixel") has become the standard for addressable LED projects. This RGB LED Breakout board, now with pre-soldered right-angle headers, is the absolute easiest way to st...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared