All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Voice Recorder Module-Breakout
SKU: DF-DFR0745 | Brand: DFRobot
Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...
Delivered by Mon 23 Nov
AP3429A 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
SKU: AF-4711 | Brand: Adafruit
The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...
Delivered by Mon 23 Nov
Tilt Sensor Module
SKU: LB-TILT | Brand: Little Bird
A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...
Delivered by Mon 23 Nov
Gravity: UART I2C NFC Module
SKU: DF-DFR0231-H | Brand: DFRobot
Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...
Delivered by Mon 23 Nov
Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T
SKU: AF-4101 | Brand: Adafruit
The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually...
Delivered by Mon 23 Nov
Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
SKU: DF-SEN0250 | Brand: DFRobot
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 ...
Delivered by Wed 2 Dec
Adafruit VEML7700 Lux Sensor - I2C Light Sensor
SKU: AF-4162 | Brand: Adafruit
The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (...
Delivered by Mon 23 Nov
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Mon 23 Nov
Standalone Toggle Capacitive Touch Sensor Breakout [AT42QT1012]
SKU: AF-1375 | Brand: Adafruit
This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...
Delivered by Mon 23 Nov
Adafruit PDM MEMS Microphone Breakout
SKU: AF-3492 | Brand: Adafruit
The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's id...
Delivered by Tue 15 Dec
SparkFun Sound Detector (with Headers)
SKU: SF-SEN-14262 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound...
Delivered by Wed 2 Dec
Gravity: Digital Tilt Sensor for Arduino / Raspberry Pi
SKU: DF-DFR0028 | Brand: DFRobot
This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus n...
Delivered by Wed 2 Dec
SparkFun Soil Moisture Sensor (with Screw Terminals)
SKU: SF-SEN-13637 | Brand: SparkFun
A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resist...
Delivered by Wed 2 Dec
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
SKU: AF-163 | Brand: Adafruit
A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...
Delivered by Mon 23 Nov
Gravity: Analog Sound Sensor For Arduino
SKU: DF-DFR0034 | Brand: DFRobot
This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...
Delivered by Mon 23 Nov
Gravity: Flexible Piezo Film Vibration Sensor
SKU: DF-SEN0209 | Brand: DFRobot
This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch. The film is a flexible compo...
Delivered by Mon 23 Nov
Adafruit Sensiron SHT31-D Temperature Humidity Sensor Breakout
SKU: AF-2857 | Brand: Adafruit
The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...
Delivered by Mon 23 Nov
HUSKYLENS 2 WiFi Module (Wireless AI Vision and AIoT)
SKU: DF-TEL0191 | Brand: DFRobot
The HUSKYLENS 2 WiFi Module is a plug-and-play USB expansion accessory that adds high-speed Wi-Fi 6 connectivity to the HUSKYLENS 2 AI vision sensor. Transform your HUSKYLENS 2 from a wired peripheral into a fully wir...
Delivered by Wed 2 Dec
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
SKU: AF-6251 | Brand: Adafruit
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...
Delivered by Tue 15 Dec
Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0629 | Brand: DFRobot
The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared