All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit BMP280 I2C or SPI Barometric Pressure Altitude Sensor
SKU: AF-2651 | Brand: Adafruit
The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...
Delivered by Fri 12 Jun
Adafruit Silicon MEMS Microphone Breakout - SPW2430
SKU: AF-2716 | Brand: Adafruit
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...
Delivered by Fri 12 Jun
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Fri 12 Jun
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
SKU: AF-3316 | Brand: Adafruit
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...
Delivered by Fri 12 Jun
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
SKU: AF-3595 | Brand: Adafruit
The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four dir...
Delivered by Thu 2 Jul
Adafruit CH9328 UART to HID Keyboard Breakout
SKU: AF-5973 | Brand: Adafruit
The Adafruit CH9328 UART to HID Keyboard Breakout lets any microcontroller or single-board computer emulate a USB keyboard — even without native USB support. Simply send ASCII characters or raw HID reports over a 9600...
Delivered by Thu 2 Jul
Adafruit S-35710 Low-Power Wake Up Timer Breakout
SKU: AF-5959 | Brand: Adafruit
The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an int...
Delivered by Fri 12 Jun
Adafruit QT 5V to 3V Shifter Breakout - STEMMA QT / Qwiic
SKU: AF-5637 | Brand: Adafruit
The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...
Delivered by Fri 12 Jun
Adafruit QT 3V to 5V Level Booster Breakout - STEMMA QT / Qwiic
SKU: AF-5649 | Brand: Adafruit
The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...
Delivered by Fri 12 Jun
NeoKey 1x4 QT I2C - Four Mechanical Key Switches with NeoPixels
SKU: AF-4980 | Brand: Adafruit
The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! ...
Delivered by Fri 12 Jun
AM2315C - Encased I2C Temperature/Humidity Sensor
SKU: AF-5182 | Brand: Adafruit
The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...
Delivered by Thu 2 Jul
Adafruit Bonsai Buckaroo - micro:bit & CLUE Plant Care Helper
SKU: AF-4534 | Brand: Adafruit
The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...
Delivered by Thu 2 Jul
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
SKU: AF-4832 | Brand: Adafruit
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...
Delivered by Thu 2 Jul
Adafruit Touch Screen Breakout Board for 4 pin 1.0mm FPC
SKU: AF-3575 | Brand: Adafruit
The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with ...
Delivered by Thu 2 Jul
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
SKU: AF-4566 | Brand: Adafruit
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Rasp...
Delivered by Thu 2 Jul
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
SKU: AF-4161 | Brand: Adafruit
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...
Delivered by Thu 2 Jul
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
SKU: AF-3660 | Brand: Adafruit
The BME680 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...
Delivered by Thu 2 Jul
INA169 Analog DC Current Sensor Breakout - 60V 5A Max
SKU: AF-1164 | Brand: Adafruit
This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...
Delivered by Thu 2 Jul
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
SKU: AF-3954 | Brand: Adafruit
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and ...
Delivered by Thu 2 Jul
i2c / SPI character LCD backpack
SKU: AF-292 | Brand: Adafruit
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
