All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity: Arduino Analog Flame Sensor
SKU: DF-DFR0076 | Brand: DFRobot
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...
Delivered by Mon 23 Nov
Reed Switch Module
SKU: LB-24-REED | Brand: Little Bird
A reed switch is an electrical switch which is operated when a magnetic field is brought near to it. Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...
Delivered by Mon 23 Nov
Analog to Digital Converter - MCP3002
SKU: SF-COM-08636 | Brand: SparkFun
The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...
Delivered by Mon 23 Nov
Five Direction Navigation Button Rocker Joystick Module
SKU: LB-LS7051 | Brand: Little Bird
Five-Direction Navigation Button Switch — Game On, Maker Style!Ready to level-up your next Arduino or microcontroller project? The Five-Direction Navigation Button Switch Module is your ticket to classic game controls...
Delivered by Mon 23 Nov
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA
SKU: SF-GPS-24114 | Brand: SparkFun
The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the ...
Delivered by Wed 2 Dec
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Wed 2 Dec
Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic
SKU: AF-4538 | Brand: Adafruit
The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibra...
Delivered by Tue 15 Dec
Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU
SKU: AF-4517 | Brand: Adafruit
The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drif...
Delivered by Tue 15 Dec
AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor
SKU: AF-5181 | Brand: Adafruit
The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...
Delivered by Mon 23 Nov
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-5309 | Brand: Adafruit
The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...
Delivered by Mon 23 Nov
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Mon 23 Nov
Gravity: Digital Tilt Sensor for Arduino / Raspberry Pi
SKU: DF-DFR0028 | Brand: DFRobot
This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus n...
Delivered by Wed 2 Dec
Adafruit Sensiron SHT31-D Temperature Humidity Sensor Breakout
SKU: AF-2857 | Brand: Adafruit
The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...
Delivered by Mon 23 Nov
Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0629 | Brand: DFRobot
The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...
Delivered by Wed 2 Dec
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
SKU: AF-5440 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...
Delivered by Mon 23 Nov
SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1
SKU: SF-BOB-19389 | Brand: SparkFun
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. This board features an OpAmp to bring the output of the microphone to a usable level, allowing ...
Delivered by Wed 2 Dec
Fermion: Multifunctional Environmental Sensor (Breakout)
SKU: DF-SEN0500 | Brand: DFRobot
This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...
Delivered by Wed 2 Dec
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)
SKU: SF-SEN-15440 | Brand: SparkFun
The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...
Delivered by Mon 23 Nov
T-Slot Photo Interrupter
SKU: AF-3986 | Brand: Adafruit
This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...
Delivered by Mon 23 Nov
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit [MPR121]
SKU: AF-2340 | Brand: Adafruit
The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared