All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
RP-C7.6-ST Thin Film Pressure Sensor
SKU: DF-SEN0297 | Brand: DFRobot
The RP-C7.6-ST is a circular flexible thin-film pressure sensor with a compact 7.6 mm active area and ultra-thin 0.3 mm profile. It converts applied force into a variable resistance — output resistance decreases as pr...
Delivered by Wed 14 Oct
RP-C18.3-LT Thin Film Pressure Sensor
SKU: DF-SEN0295 | Brand: DFRobot
The RP-C18.3-LT is a circular flexible thin-film pressure sensor, 18.3mm in diameter, designed for highly sensitive detection of both static and dynamic force. When pressure is applied to the active area, resistance d...
Delivered by Wed 14 Oct
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)
SKU: SF-SEN-15440 | Brand: SparkFun
The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...
Delivered by Mon 5 Oct
T-Slot Photo Interrupter
SKU: AF-3986 | Brand: Adafruit
This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...
Delivered by Mon 5 Oct
Alcohol sensor for Arduino
SKU: LB-LR0205 | Brand: Little Bird
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...
Delivered by Mon 5 Oct
Round Force-Sensitive Resistor (FSR) [Interlink 402]
SKU: AF-166 | Brand: Adafruit
The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, lo...
Delivered by Mon 5 Oct
Anemometer Kit (0-5V)
SKU: DF-SEN0170 | Brand: DFRobot
A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion r...
Delivered by Mon 5 Oct
Adafruit Ultimate GPS FeatherWing
SKU: AF-3133 | Brand: Adafruit
The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to...
Delivered by Mon 5 Oct
Adafruit PCF8523 Real Time Clock Assembled Breakout Board
SKU: AF-3295 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...
Delivered by Tue 27 Oct
Weatherproof Ultrasonic Sensor with Separate Probe
SKU: DF-SEN0208 | Brand: DFRobot
Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! We have developed waterproof ultrasonic distance senso...
Delivered by Wed 14 Oct
Gravity: Arduino Digital Water Flow Sensor - 1/8
SKU: DF-SEN0216 | Brand: DFRobot
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to det...
Delivered by Wed 14 Oct
Gravity: UV Index Sensor (240-370nm, UVA, UVB, UVC)
SKU: DF-SEN0636 | Brand: DFRobot
The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...
Delivered by Wed 14 Oct
Gravity: mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART)
SKU: DF-SEN0610 | Brand: DFRobot
##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...
Delivered by Wed 14 Oct
Adafruit STEMMA Reflective Photo Interrupt Sensor - TCRT1000
SKU: AF-5913 | Brand: Adafruit
The Adafruit STEMMA Reflective Photo Interrupt Sensor uses a TCRT1000 right-angle optical module to detect reflective surfaces. An onboard IR LED emits light, and when an object reflects it back to the IR phototransis...
Delivered by Tue 27 Oct
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Wed 14 Oct
Useful Sensors Tiny Code Reader
SKU: SF-SEN-23352 | Brand: SparkFun
QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...
Delivered by Mon 5 Oct
Qwiic Micro Dynamic NFC/RFID Tag
SKU: SF-SPX-20691 | Brand: SparkFun
The STMicroelectronics ST25DV dynamic Near Frequency Communication / Radio Frequency Identification tag ICs are awesome! The ST25DV64KC offers 64-kBit (8-kBytes) of EEPROM memory which can be accessed over both I2C an...
Delivered by Mon 5 Oct
Mini Analog Thumbstick - Similar to Joycon Style
SKU: AF-5628 | Brand: Adafruit
A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...
Delivered by Tue 27 Oct
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Tue 27 Oct
SparkFun Environmental Sensor - BME688 (Qwiic)
SKU: SF-SEN-19096 | Brand: SparkFun
The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared