All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun Pulsed Coherent Radar Sensor - Acconeer XM125 (Qwiic)
SKU: SF-SEN-24540 | Brand: SparkFun
Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...
Delivered by Wed 2 Dec
Pixelblaze Sensor Expansion Board
SKU: AF-5944 | Brand: Adafruit
The Pixelblaze Sensor Expansion Board makes it easy to write patterns that use sound, accelerometer/tilt, or light to create reactive patterns. Normalized frequency data, acceleration, and light data are fed directly ...
Delivered by Mon 23 Nov
SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)
SKU: SF-GPS-16481 | Brand: SparkFun
With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Wed 2 Dec
Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
SKU: AF-3709 | Brand: Adafruit
The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...
Delivered by Tue 15 Dec
Gravity: LTC4316 I2C Address Shifter - I2C Conflict Resolver for Arduino & Raspberry Pi
SKU: DF-DFR1193 | Brand: DFRobot
The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...
Delivered by Wed 2 Dec
50m TOF Laser Ranging Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0648 | Brand: DFRobot
The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...
Delivered by Wed 2 Dec
Adafruit SPA06-003 Temperature + Pressure Sensor
SKU: AF-6420 | Brand: Adafruit
The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...
Delivered by Tue 15 Dec
Adafruit STHS34PF80 IR Presence / Motion Sensor
SKU: AF-6426 | Brand: Adafruit
The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...
Delivered by Tue 15 Dec
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
SKU: AF-6331 | Brand: Adafruit
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...
Delivered by Tue 15 Dec
10.85" e-Paper Display (G) – 1360x480, Red/Yellow/Black/White, SPI
SKU: WS-29792 | Brand: Waveshare
The Waveshare 10.85" e-Paper Display (G) is a wide-format E-Ink screen with 1360×480 resolution and quad-colour output — red, yellow, black, and white. Using microcapsule electrophoretic technology, it delivers a pape...
Delivered by Tue 15 Dec
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Tue 15 Dec
SparkFun GPS-RTK-SMA Kit
SKU: SF-KIT-18292 | Brand: SparkFun
The SparkFun GPS-RTK-SMA Kit provides everything you need to get started with centimetre-level GPS accuracy using the u-blox ZED-F9P module. Capable of 10mm three-dimensional positioning accuracy with RTK corrections,...
Delivered by Wed 2 Dec
SparkFun Pressure Sensor - BMP581 (Qwiic)
SKU: SF-SEN-20170 | Brand: SparkFun
The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized, 1in. by 1in. absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution (down to 1/64Pa) and accuracy while maintain...
Delivered by Wed 2 Dec
SparkFun Pressure Sensor - BMP384 (Qwiic)
SKU: SF-SEN-19662 | Brand: SparkFun
The SparkFun Qwiic Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 24-bit) and uses a gel-filled cavity to provide extra resistance t...
Delivered by Wed 2 Dec
SparkFun Qwiic dToF Imager - TMF8820
SKU: SF-SEN-19036 | Brand: SparkFun
A direct time-of-flight (dToF) sensor from AMS that measures distances up to 5 metres using SPAD (Single Photon Avalanche Photodiode) and histogram technology. The TMF8820 provides 3×3 multi-zone output with multi-obj...
Delivered by Wed 2 Dec
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Tue 15 Dec
SparkFun Photodetector Breakout - MAX30101 (Qwiic)
SKU: SF-SEN-16474 | Brand: SparkFun
The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Brea...
Delivered by Wed 2 Dec
SparkFun High Precision Temperature Sensor - TMP117 (Qwiic)
SKU: SF-SEN-15805 | Brand: SparkFun
The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...
Delivered by Wed 2 Dec
M5StickC Yun Hat(SH20,BMP280,SK6812)
SKU: M5-U070 | Brand: Little Bird
The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...
Delivered by Mon 23 Nov
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 MAX32664 (Qwiic)
SKU: SF-SEN-15219 | Brand: SparkFun
The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. W...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared