All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Waterproof Mirror Reflection Photoelectric Sensor Switch (10~100cm)
SKU: DF-SEN0580 | Brand: DFRobot
What is Mirror Reflection Photoelectric Sensor Switch?A mirror reflection photoelectric sensor switch is a type of photoelectric sensor that uses a reflector to detect the presence or absence of an object. It work...
Delivered by Tue 23 Jun
CS20 Dual-Resolution 3D TOF Solid-state LiDAR (5V, 5m)
SKU: DF-SEN0579 | Brand: DFRobot
This CS20 Dual-Resolution 3D TOF Solid-state LiDAR is equipped with a ToF image sensor with a resolution of 640*480 and uses ToF technology to capture three-dimensional information of objects and space. It can accu...
Delivered by Tue 23 Jun
Hackster and DFRobot IoT Starter EEDU Kit (ESP32)
SKU: DF-TEM2022B-EN-1 | Brand: DFRobot
An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and a...
Delivered by Tue 23 Jun
SparkFun Thing Plus - NINA-B306
SKU: SF-WRL-20854 | Brand: SparkFun
The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blox™, the ISM330DHCX 6DoF IMU from STMicroelectronics™ and the BME280...
Delivered by Tue 23 Jun
Arduino Nano BLE Sense Rev2 with Headers
SKU: SF-DEV-21251 | Brand: SparkFun
The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard...
Delivered by Fri 12 Jun
ScoutMakes FM Radio Board - STEMMA QT / Qwiic
SKU: AF-5651 | Brand: Adafruit
An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song na...
Delivered by Fri 12 Jun
SparkFun 9DoF IMU Breakout - ISM330DHCX, MMC5983MA (Qwiic)
SKU: SF-SEN-19895 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedo...
Delivered by Tue 23 Jun
SparkFun PIR Breakout Starter Kit (1uA)
SKU: SF-KIT-19518 | Brand: SparkFun
The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA...
Delivered by Tue 23 Jun
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
SKU: PL-5030 | Brand: Pololu
The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three ...
Delivered by Fri 12 Jun
Adafruit LSM6DS3TR-C + LIS3MDL - Precision 9 DoF IMU
SKU: AF-5543 | Brand: Adafruit
The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — prov...
Delivered by Thu 2 Jul
Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C
SKU: DF-SEN0496 | Brand: DFRobot
This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...
Delivered by Tue 23 Jun
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Tue 23 Jun
Ring Inductive Proximity Sensor (15mm Hole Diameter)
SKU: DF-FIT0762 | Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...
Delivered by Tue 23 Jun
Gravity: I2C H3LIS200DL Triple Axis Accelerometer Sensor (±100g/±200g)
SKU: DF-SEN0412 | Brand: DFRobot
The H3LIS200DL is a high-performance triple-axis linear accelerometer with an ultra-low power consumption of 10uA. It offers user-selectable scales of ±100g/±200g and is capable of measuring accelerations with output ...
Delivered by Tue 23 Jun
Gravity: Serial Data Logger for Arduino
SKU: DF-TEL0147 | Brand: DFRobot
Compared to the old MicroSD Card Module, this Gravity: Serial Data Logger can store data more conveniently, and supports direct data printing through serial port without additional codes.The Serial Data Logger provide...
Delivered by Tue 23 Jun
GM77 Barcode and QR Code Scanning Module
SKU: DF-SEN0512 | Brand: DFRobot
This scanning module reads barcodes or 2D codes with a scan speed of 15m/min. With small size and high-efficiency recognition, it is easy to be integrated into various industrial equipment and applications. The mod...
Delivered by Fri 12 Jun
GPS + BDS BeiDou Dual Module
SKU: DF-TEL0132 | Brand: DFRobot
A compact multi-constellation GNSS positioning module based on the AT6558 chip with 32 tracking channels. It simultaneously receives signals from six satellite navigation systems: GPS, BeiDou, GLONASS, Galileo, QZSS, ...
Delivered by Tue 23 Jun
AM2315C - Encased I2C Temperature/Humidity Sensor
SKU: AF-5182 | Brand: Adafruit
The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...
Delivered by Thu 2 Jul
ESP32 Dual Antenna WiFi + Bluetooth Module with 8MB FLASH
SKU: AF-5344 | Brand: Adafruit
ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it ...
Delivered by Thu 2 Jul
SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)
SKU: SF-SEN-17871 | Brand: SparkFun
This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectab...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
