All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit LPS35HW Water Resistant Pressure Sensor
SKU: AF-4258 | Brand: Adafruit
The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...
Delivered by Wed 5 Aug
Adafruit BMP280 I2C or SPI Barometric Pressure Altitude Sensor
SKU: AF-2651 | Brand: Adafruit
The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...
Delivered by Wed 5 Aug
Adafruit Silicon MEMS Microphone Breakout - SPW2430
SKU: AF-2716 | Brand: Adafruit
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...
Delivered by Wed 5 Aug
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Wed 5 Aug
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
SKU: AF-3316 | Brand: Adafruit
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...
Delivered by Thu 27 Aug
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
SKU: AF-3595 | Brand: Adafruit
The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four dir...
Delivered by Thu 27 Aug
Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE
SKU: AF-6174 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...
Delivered by Thu 27 Aug
AM2315C - Encased I2C Temperature/Humidity Sensor
SKU: AF-5182 | Brand: Adafruit
The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...
Delivered by Thu 27 Aug
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
SKU: AF-4161 | Brand: Adafruit
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...
Delivered by Thu 27 Aug
Pulse Sensor Amped
SKU: AF-1093 | Brand: Adafruit
Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...
Delivered by Thu 27 Aug
Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
SKU: AF-3709 | Brand: Adafruit
The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...
Delivered by Thu 27 Aug
Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino
SKU: AF-2746 | Brand: Adafruit
The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with i...
Delivered by Wed 5 Aug
ChronoDot - Ultra-precise Real Time Clock [v2.1]
SKU: AF-255 | Brand: Adafruit
THIS IS THE LATEST VERSION 2.1The ChronoDot RTC is an extremely accurate real time clock module, based on the DS3231 temperature compensated RTC (TCXO). It includes a CR1632 battery, which should last at least 8 years...
Delivered by Thu 27 Aug
PSP 2-Axis Analog Thumb Joystick
SKU: AF-444 | Brand: Adafruit
Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...
Delivered by Wed 5 Aug
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Thu 27 Aug
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
SKU: AF-6335 | Brand: Adafruit
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) ...
Delivered by Thu 27 Aug
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
SKU: AF-6331 | Brand: Adafruit
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...
Delivered by Thu 27 Aug
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
SKU: AF-5970 | Brand: Adafruit
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work...
Delivered by Thu 27 Aug
Adafruit Chainable DS18B20 Extender Breakout - STEMMA JST PH 2mm
SKU: AF-5971 | Brand: Adafruit
The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...
Delivered by Thu 27 Aug
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Thu 27 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared