All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity: Arduino Analog Flame Sensor
SKU: DF-DFR0076 | Brand: DFRobot
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...
Delivered by Mon 23 Nov
Fermion: MEMS Hydrogen H2 Gas Detection Sensor (Breakout, 0.1-1000ppm)
SKU: DF-SEN0572 | Brand: DFRobot
The Fermion MEMS H2 Sensor is a compact hydrogen gas detection module using micro-electromechanical system (MEMS) technology. It provides qualitative measurement of hydrogen concentration from 0.1 to 1000 ppm via an a...
Delivered by Wed 2 Dec
Reed Switch Module
SKU: LB-24-REED | Brand: Little Bird
A reed switch is an electrical switch which is operated when a magnetic field is brought near to it. Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...
Delivered by Mon 23 Nov
Analog to Digital Converter - MCP3002
SKU: SF-COM-08636 | Brand: SparkFun
The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...
Delivered by Mon 23 Nov
Gravity: DS18B20 Temperature Sensor (Arduino Compatible)
SKU: DF-DFR0024 | Brand: DFRobot
While there are many types of temperature sensors available in the market, the DS18B20 arduino Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability. It...
Delivered by Wed 2 Dec
Gravity: Arduino LM35 Temperature Sensor
SKU: DF-DFR0023 | Brand: DFRobot
This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.The LM35 chip is produced by National Semiconductor Corporation and offers a fun...
Delivered by Mon 23 Nov
Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm
SKU: AF-3317 | Brand: Adafruit
The Adafruit VL53L0X is a Time-of-Flight (ToF) distance sensor from ST that uses an invisible laser to measure distances from approximately 50 mm to 1200 mm. By timing how long the laser light takes to bounce back, it...
Delivered by Mon 23 Nov
Gravity: Arduino DHT11 Temperature Humidity Sensor
SKU: DF-DFR0067 | Brand: DFRobot
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memo...
Delivered by Wed 2 Dec
Five Direction Navigation Button Rocker Joystick Module
SKU: LB-LS7051 | Brand: Little Bird
Five-Direction Navigation Button Switch — Game On, Maker Style!Ready to level-up your next Arduino or microcontroller project? The Five-Direction Navigation Button Switch Module is your ticket to classic game controls...
Delivered by Mon 23 Nov
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA
SKU: SF-GPS-24114 | Brand: SparkFun
The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the ...
Delivered by Wed 2 Dec
SparkFun VR IMU Breakout - BNO086 (Qwiic)
SKU: SF-SEN-22857 | Brand: SparkFun
Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's where the SparkFun VR IMU Breakout comes in. At its heart is CEVA’s BNO086, a combi...
Delivered by Wed 2 Dec
Fermion: MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0566 | Brand: DFRobot
Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA...
Delivered by Mon 23 Nov
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Wed 2 Dec
Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic
SKU: AF-4538 | Brand: Adafruit
The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibra...
Delivered by Tue 15 Dec
Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU
SKU: AF-4517 | Brand: Adafruit
The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drif...
Delivered by Tue 15 Dec
AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor
SKU: AF-5181 | Brand: Adafruit
The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...
Delivered by Mon 23 Nov
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-5309 | Brand: Adafruit
The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...
Delivered by Mon 23 Nov
Gravity: DHT20 Temperature & Humidity Sensor for Arduino
SKU: DF-SEN0497 | Brand: DFRobot
The DHT20 temperature & humidity sensor is the newly upgraded version of the DHT11. Data accuracy, stability, response speed, measurement range are greatly improved up. DHT20 is a brand new ASIC dedicated chip, an imp...
Delivered by Wed 2 Dec
Adafruit SPI Flash SD Card - XTSD 512 MB
SKU: AF-4899 | Brand: Adafruit
The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512...
Delivered by Mon 23 Nov
Tilt Sensor Module
SKU: LB-TILT | Brand: Little Bird
A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared