All Products

SKU: SF-CAB-14132 | Brand: SparkFun

This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerful reader board. This cable is perfect for extending pre-existing c...

SKU: DF-KIT0015 | Brand: DFRobot

This MiniQ motor wheel set is especially designed for education and hobbies. It features a powerful metal gear motors which provide a speedy robot. With buildin encoders, it can do PID speed control which is Ideal...

SKU: DF-DFR0224 | Brand: DFRobot

The Arduino Screwless Terminal Shield breaks out all Arduino Uno-compatible header pins to spring-loaded push-in terminal blocks. Press the lever, insert your wire, and release — no screwdriver needed. The shield stac...

SKU: DF-FIT0273 | Brand: DFRobot

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08535 | Brand: SparkFun

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key F...

SKU: SF-PRT-08506 | Brand: SparkFun

A 2×5 (10-pin) shrouded box header on standard 0.1" (2.54 mm) pitch. The keyed shroud prevents reversed cable connections, making it ideal for programming headers, data buses, and other multi-pin interfaces. Key Feat...

SKU: SF-DEV-08463 | Brand: SparkFun

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: SF-TOL-12033 | Brand: SparkFun

A parts kit for building or repairing an additional arm on the SparkFun Third Hand soldering helper. Includes alligator clips and the hardware needed to convert a coolant hose segment into a flexible helping hand. Id...

SKU: AF-2995 | Brand: Adafruit

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provide...

SKU: SF-COM-12021 | Brand: SparkFun

These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating, your project won’t be water proof but there is acc...

SKU: SF-COM-08034 | Brand: SparkFun

A standard DIP switch with 8 individual switch positions at 0.1″ (2.54mm) pin spacing. Fits directly into breadboards and standard PCB through-holes for easy prototyping and configuration. Specifications Positions ...

SKU: SF-COM-11975 | Brand: SparkFun

A heavy-duty, panel-mount latching pushbutton with an illuminated white LED ring. Built from stainless steel with IP65 weatherproofing, this 16mm threaded switch is designed to withstand tough environments while deliv...

SKU: SF-COM-11972 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threa...

SKU: SF-COM-11970 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm thread...

SKU: SF-PRT-00553 | Brand: SparkFun

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

SKU: SF-PRT-00548 | Brand: SparkFun

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand sol...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: SF-SEN-11827 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...

SKU: SF-CAB-00507 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long

SKU: DF-SEN0147 | Brand: DFRobot

This time we reinvented the line-tracking sensor. Beyond recognizing two specific colors or output through digital or analog only, the Smart Gray Sensor has integrated both digital and analog output features. In ...