All Products

SKU: SF-PRT-09279 | Brand: SparkFun

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-SEN-09196 | Brand: SparkFun

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple...

SKU: SF-COM-09151 | Brand: SparkFun

A compact 0.5W speaker with 8 ohm impedance, small enough to fit inside robot builds, enclosures, and portable electronics projects. Suitable for audio output from amplifier boards, microcontrollers with DAC/PWM audio...

SKU: SF-BOB-09118 | Brand: SparkFun

This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the h...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...

SKU: SF-COM-09032 | Brand: SparkFun

This is a joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a se...

SKU: SF-PRT-09015 | Brand: SparkFun

A surface-mount 6-pin right-angle male header with standard 2.54 mm (0.1 in) pitch between pins and between rows. Ideal for adding a programming or serial header to compact PCB designs where a low-profile, right-angle...

SKU: AF-2823 | Brand: Adafruit

This 2×20-pin right-angle female header with 0.1" (2.54mm) pitch provides a convenient way to add right-angle connectivity to circuit boards with dual-row 40-pin headers. It mates with standard 2×20 dual male headers ...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: SF-TOL-08794 | Brand: SparkFun

Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.

SKU: DF-SEN0116 | Brand: DFRobot

An AB two-phase optical encoder designed for the DFRobot 2WD MiniQ robot chassis. Uses two infrared reflective sensors to generate quadrature pulse waveforms with approximately 90° phase difference, allowing you to de...

SKU: SF-COM-08662 | Brand: SparkFun

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list ...

SKU: SF-PRT-12070 | Brand: SparkFun

A solderable PCB that mirrors the layout of a standard solderless breadboard, with the same pin connections and power rails. Once you've finished prototyping on a breadboard, transfer your circuit to this board and so...

SKU: SF-PRT-08433 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal ca...

SKU: SF-DEV-14011 | Brand: SparkFun

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: SF-BOB-12035 | Brand: SparkFun

Add a Micro-B USB connector to your project without the hassle of soldering tiny SMD pads. This compact breakout board routes all five pins — VCC, GND, ID, D−, and D+ — to a standard 0.1" pitch header for easy breadbo...

SKU: SF-WRL-00593 | Brand: SparkFun

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA ...

SKU: DF-SEN0156 | Brand: DFRobot

A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control. The Rotary Switch uses an analog input to read the 12 state which saves...

SKU: SF-COM-11841 | Brand: SparkFun

A snap-in plastic LED holder designed for 10 mm LEDs. Simply press the LED into the holder and snap the assembly into a 35/64″ (approximately 14 mm) panel hole — no screws or tools required. Key Features Snap-In De...

SKU: SF-COM-00521 | Brand: SparkFun

These are very common, high quality BJT NPN transistors made by ST Micro. Datasheet: 2N3904