All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit NeoPXL8 Friend - 8 x Strands NeoPixel Level Shifter
SKU: AF-3975 | Brand: Adafruit
Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 indep...
Delivered by Tue 24 Nov
Gravity: VL53L0X ToF Laser Range Finder
SKU: DF-SEN0245 | Brand: DFRobot
The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional ...
Delivered by Tue 24 Nov
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
SKU: DF-DFR0518 | Brand: DFRobot
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo moto...
Delivered by Tue 24 Nov
Resistor 1M Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SKU: SF-PRT-14494 | Brand: SparkFun
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. ...
Delivered by Tue 24 Nov
Plastic Water Solenoid Valve - 12V - 1/2 Nominal
SKU: AF-997 | Brand: Adafruit
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the va...
Delivered by Tue 24 Nov
Adafruit VEML7700 Lux Sensor - I2C Light Sensor
SKU: AF-4162 | Brand: Adafruit
The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (...
Delivered by Tue 24 Nov
Line Laser Diode - 5mW 650nm Red
SKU: AF-1057 | Brand: Adafruit
You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...
Delivered by Tue 24 Nov
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Tue 24 Nov
ESP8266 ESP-01S Relay
SKU: LB-LS0205 | Brand: Little Bird
A WiFi-controlled relay module based on the AI-Thinker ESP-01S (ESP8266). It lets you switch AC or DC loads remotely over WiFi, making it a simple building block for smart home automation, IoT switching, and remote co...
Delivered by Tue 24 Nov
Large Arcade Button with LED - 60mm Yellow
SKU: AF-1191 | Brand: Adafruit
BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...
Delivered by Tue 24 Nov
Standalone Toggle Capacitive Touch Sensor Breakout [AT42QT1012]
SKU: AF-1375 | Brand: Adafruit
This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...
Delivered by Tue 24 Nov
Adafruit Push-button Power Switch Breakout
SKU: AF-1400 | Brand: Adafruit
The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...
Delivered by Tue 24 Nov
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
SKU: AF-1411 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with...
Delivered by Tue 24 Nov
VGA Shield V2.0 Expansion Board For Raspberry Pi 3
SKU: LB-LR0601 | Brand: Little Bird
This VGA expansion board adds a VGA output to your Raspberry Pi via the GPIO header, while leaving the HDMI connector free for a second display or other use. Compatible with Raspberry Pi 3B, 2B, B+, and A+. Setup req...
Delivered by Tue 24 Nov
Maker-Friendly Zipper Case - Red
SKU: AF-3700 | Brand: Adafruit
A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...
Delivered by Tue 24 Nov
White 1080P Mini HDMI To VGA Converter Box Adapter
SKU: LB-LS0100 | Brand: Little Bird
HS0100 White 1080P Mini HDMI To VGA Converter Box Adapter
Delivered by Tue 24 Nov
E-Textiles Light Sensor-TEMT6000
SKU: LB-LS0239 | Brand: Little Bird
This e-textiles ambient light sensor uses the TEMT6000 phototransistor to detect light levels. Designed for wearable electronics, it features a compact 20 mm round PCB that's only 0.8 mm thick — thin enough to sew int...
Delivered by Tue 24 Nov
WS2812B RGB LED module
SKU: LB-LS0233 | Brand: Little Bird
This is a breakout board for the WS2812B RGB LED. The WS2812B (or “NeoPixel”) is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out.Several of these breakouts c...
Delivered by Tue 24 Nov
3W LED Module High Power Module
SKU: LB-LR0038 | Brand: Little Bird
This 3W high-power LED module delivers bright, warm white illumination with a luminous output of 180–200 lumens. With a wide 180° viewing angle and a forward voltage of just 3.3–3.6V, it's suitable for lighting projec...
Delivered by Tue 24 Nov
16mm Panel Mount Momentary Pushbutton - Yellow
SKU: AF-1502 | Brand: Adafruit
A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel....
Delivered by Tue 24 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared